As titled, how to distinguish VAG HU162T 8-Cut, 9-Cut and 10-Cut key blades? So we can properly cut keys using xhorse dolphin or condor key cutting machines. The picture shows the side of the 3 keys. From top to bottom, they are 8-cut, 9-cut and 10-cut. The 8-cut (HU162T (8)) key is the easiest to distinguish. It has only one fixed cut on the side and is straight. The effectiv...
Pogledaj dalje »Tutorial: How to replace/change the spindle motor belt for Xhorse Dolphin XP005 key cutting machine. We are going to show how to replace the motor belt in your Dolphin XP005. Make sure that your purchase the right motor belt. Remove our handle, and remove screw on the other side. Take off this socket. Make sure you get all your pieces out. Then unscrew these 4 screws from the left side. Rem...
Pogledaj dalje »If you had error code 5 when cutting key with Xhorse Dolphin XP005L key cutting machine (error images shown below), here is the possible solution. Solution: Remove those 3 screws set from probe base. Check the small wire and clean up iron filings.
Pogledaj dalje »How to Check Xhorse Dolphin XP005/XP005L Battery Information? In Xhorse App, go to Device Information->Key Cutting-> Power->Check battery information Need to connect dolphin with Xhorse App to read battery information. If it is XP005L, you can check battery information on the App or in the device (go to Battery information). If the battery cannot charge or has ...
Pogledaj dalje »Question: How do you duplicate emergency key for 2021 Toyota Highlander TOY51 SINGLE SIDE with the newer version of Xhorse Dolphin XP005 with M5 clamp? Probe does not detect key, clamp seems too low. Here is the clue: You cut it on the wrong side. You need to use the correct profile use the TOY40 one sided blade for emergency blade and it will work. You cut the key on side A, not side B, th...
Pogledaj dalje »We have a customer who successfully decoded and cut 2022 Ford Maverick HU198T key blank with Xhorse condor ii under Escape HU198T. Here is another way to decode and cut new HU198T key blank if you don’t know decode under Escape HU198T. It is a 2024 Ford Mavericks. It has new HU198T key blank. Let’s control the Xhorse Dolphin XP005 key cutting machine by the VVDI Key Tool Plus. Go to Cut key...
Pogledaj dalje »Here comes the Xhorse Dolphin XP005 (Generation 1) automotive key cutting machine maintenance manual. This manual applies to models with serial number KM06, KM12 of Dolphin Generation I model. 1.Machine disassembly exploded pictures P1-P10 location 2 Method of replacing parts due to machine malfunction 2.1 Replace the battery Please refer to the disassembly pictures P1,...
Pogledaj dalje »