Today we have been tuning Nissan 350Z’s for increased power. Although they power gain is only around 10-15BHP and 20Nm of torque they drive so much smoother. From the initial test drive on the road the mid range punch becomes noticeable pulling stronger to the rev limiter in every gear. We would say this feels more like 20+bhp increase on the road. The earlier 350Z uses a Hitachi ECU that c...
Pogledaj dalje »As you know, for crp3 we can do the trick for unlock crp3 heating on Ktag or Kess V2 programmer or buy a new NXP and write it (only one time) Here are some questions & answers on Google form, questions about “how will you use J-ink if its crp3 ?”… Q: Can I update NXP directly if at this moment I have Ktag 6.070? Or I will need to replace it with new one and then to update to 7.030 ? A: if your...
Pogledaj dalje »Ktag help file: BOSCH EDC17 ECUs for Ford vehicles. This will be of great help to those here that want to do read/write Ford ECU EDC 17 with K-tag programmer from China. Warnings To use this protocol of communication you have to remove and open the ECU. It is a risky operation, to be done with great care and caution to avoid damaging the ECU beyond repair. After opening the ECU and before proceedi...
Pogledaj dalje »How much do you know about Ktag firmware 7.020 eu clone & China clone? And which one is better for ecu programming & remapping? This write-up will tell you all about it. Enjoy! Ktag v7.020 eu clone: K-tag eu with blue board: Eu ktag clone with red board: Ktag eu clone with purple pcb: Note: the purple ktag is the newest eu version with firmware v7.020. Ktag v7.020 China clo...
Pogledaj dalje »This is how to use Ktag 7.020 firmware master version ecu programming tool to read EDC17C59 ECU from 2013 Opel Insignia, including EDC17C59 and ktag ksuite cable connection/pinouts. Here you go. Ktag fw 7.020 clone is working with EDC17C59 ECU Select the model Ktag v7.020 master clone warnings, notice, recommendation, instructions EDC17C59 connection instructions Direct connection ED...
Pogledaj dalje »This is the installation guide of Ktag firmware 7.020 Ksuite ecu programming software 2.23 master version. V2.23 Ktag firmware 7.020 new features: 1- More languages available KTAG fw 7.003: English, Italian, Portuguese KTAG fw 7.020: English, Italian, Portuguese, French, Deutsch, Spanish 2- More ECUs and cars can be tested with KTAG fw 7.020 adds 100+ ECU types and supports ne...
Pogledaj dalje »Here are all details of BMW F10 EDC17CP45 ECU reading and writing, including tools to r/w EDC17CP45, how to open the ecu, how to read/write F10 EDC17CP45 with ktag ecu programming tool master clone, etc. Tool to read / write f10 edc17c45: – Firmware Ktag 6.070 can do it. 100% – ktag 7.020 works as well – Just get the good Ktag with Tricore protocols for any ME17/EDC17 ecus So, possible to read / w...
Pogledaj dalje »