Entry question: Will Alientech kess3 read and write 2021 Citroen Berlingo Bosch MD1S003 ECU? Yes, You can read with confidence. Bench mode. This ECU is not locked. How to Tell if PSA MD1CS003 ECU is Locked or Not? Most MD1 ECUs after mid-2020 or later are locked. Have tried a few 2021 PSA and were locked. For PSA MD1CS003 ECU, check part number. Here is a tip to identify if th...
Pogledaj dalje »What is the difference between Alientech KESS3 and the new Powergate 4? They are separate devices. They use different manager dashboards. Operation Mode: Powergate 4 is the OBD version of KESS3 (KESS3 with all OBD protocols). Powergate reads/writes ECU via Powergate App by OBD only. KESS3 will read/write ECU/TCU via OBD, bench and boot mode. Manufacturers: Powerg...
Pogledaj dalje »Can Alientech KESS3 clone Mercedes ME9.7 ECU? via OBD or BDM? Here is the clue. No VR file at alientech, only option left is BDM. If you have BDM adapter, follow kess v3 wiring diagram to read and write ME 9.7 via BDM. Reading was a bit faster but the writing was really slow. Well over 30. The old Kess v2 master version takes 45 minutes. &nbs...
Pogledaj dalje »Alientech KESS3 world exclusive! Reprogram via OBD on some models within the Suzuki range with the Bosch MED17.9.63 engine control unit. UPGRADE 1.82 Work on Suzuki Baleno, Swift, SX-4, and Vitara, thanks to the new Virtual Reading protocol for KESS3. Expand your workshop’s business opportunities with a quick and precise service dedicated to the small turbo-petrol engines from the Ja...
Pogledaj dalje »Is it safe to read and write Simos 18.1 with Alientech kess3 by OBD? or better boot mode? KESS V3 reads and write Simos 18.1 via both obd and boot mode. OBD mode: Works perfectly kess3 with simos18x. In obd, first writing takes a bit but the next 1min. It is safe 100%. Just need a lot of patience and a tension finder because it takes some time to write it. For example: 1. lite...
Pogledaj dalje »