Prijavi se

Zapamti me

ktag 6.070

Ktag 7.020 Firmware Update Tutorial

Updating Ktag firmware to 7.020 version doesn’t block processor. For correct operation device it is necessary to change CID SDcard on 035344535330344780399b1368010300 This procedure is supported by not each SDcard. Programs for change of CID and the description of process easy to find in the Internet. I used mmc32 and evoplus_cid from github. This programs for linux. I haven’t found soft working i...

Pogledaj dalje »

Ktag Reads Citroen C5 2008 Marelli IAW 6LP on boot

This is IAW 6LPB Magneti Marelli Bench Flashing with a Ktag master ecu programmer in Boot Mode. Citroen C5 bench flashing – STF10280 boot mode Disassemble the ECU Run Ktag kusite software Select the model Manufacturer: Citroen Model: C5 (II) Version: 2000 16v Type: RFJ (EW10A) KW: 103 HP: 140 Fuel: Petrol MY: 2008 ECU: Magneti Marelli IAW 6LP Mode: BOOT ST FAM: 45 CHK: √ RO: √ Connection instructi...

Pogledaj dalje »

How to use Ktag 7.020 Clone to read BMW X5 2013 EDC17CP45

Question: I have a bmw with edc17cp45. Car is x5 4.0 yes I know this is 3.0 diesel engine year is 2013. Some were I read this ecu is password protected.  What tool and how to read the data?   Answer: Has to be drilled , only one hole if you have later k-tag or x17 and kess obd might be a cp56 China ktag clone newer version works on this ecu. ktag 6.070 work with this ecu but via dimsport tras...

Pogledaj dalje »

Ktag Pinouts to Unlock Smart 453 Bosch ME17.9.20 GPT

Question: Does anyone know the password release method for “Smart fortwo 453 ECU Bosch ME 17.9.20”? My tuning tool is K-Tag Master Clone     Solution: if you use ktag 6.070 – it does not work. this gpt ecu   ME17.9.20 TC1782 ME17.9.20 IROM TC1782 GPT KTAG 7.020 If you fail with ktag 7.020, best way out fаind a friend with the original ktag 6.070 To read and write this ecu you best u...

Pogledaj dalje »

How to use Ktag 6.070 for Tricore BOOT

Ktag should be able to program with Jtag, BDM and Boot protocols. However, I have no luck with Ktag 6.070 for Tricore BOOT; My way is to rework the board Before rework:Everything working fine (BDM, Kline etc.) except Tricore boot Connection OK, ID OK , begin reading ok , then jump when reading and finish with “error reading” (between 20% and 44%) I try with SID807EVO , EDC17C54 and MED17.5.2, same...

Pogledaj dalje »

How to use Kess V2 Ktag to Unlock CRP3 LPC2478 via J-link

As you know, for crp3 we can do the trick for unlock crp3 heating on Ktag or Kess V2 programmer or buy a new NXP and write it (only one time) Here are some questions & answers on Google form, questions about “how will you use J-ink if its crp3 ?”… Q: Can I update NXP directly if at this moment I have Ktag 6.070? Or I will need to replace it with new one and then to update to 7.030 ? A: if your...

Pogledaj dalje »

How to Read and Write BMW Bosch DME MEVD172G by KTM100

Purpose: DIY – DME/ECU Read Write and Tuning  2016MY F82 M using Ktag KTM100 master clone ecu tuning tool.   Disclaimer: Credit to su_root on bimmer forum. All information provided is for educational purposes. I am not responsible for any direct or indirect damage that may occur to your property as a result of the information provided here.   Attachments: BMW-Bosch DME MEVD172G Wiring Gu...

Pogledaj dalje »