Some users reported that they have problems updating vvdi mini obd tool firmware and sync device. If the version is lower than 1.5.0, try several times, change PC or network, if all failed, device information is missing. Need to send back for repair. If the version is 2.1.50, disassemble the device, replace a new battery, update firmware and sync device again. Sync devi...
Pogledaj dalje »If Xhorse VVDI Mini OBD tool asks to update the firmware to V1.5.0 or above using the Xhorse Upgrade kit, here are the upgrade tips. Update is done via Upgrade kit from PC (not phone). First of all, update Xhorse upgrade kit to 1.8.2 online or directly install Upgrade kit 1.8.2. Select device as MiniOBD1 and version 1.5.0. Press Upgrade. Update fir...
Pogledaj dalje »Problem: I need to program key for my Toyota RAV 4 2016, lost all keys using xhorse vvdi mini obd tool and 8A non-smart key adapter. But the app says the adapter was bound to other devices. Any solution? Solution: 8A adapter can only be bound to 1 xhorse device (key tool max pro, vvdi2, key tool plus or vvdi mini obd tool). Must use the adapter with the device already combined. For e...
Pogledaj dalje »This is 2003 Toyota with ID4D(67) chip all keys lost, so I’ll use Xhorse VVDI Key Tool Max + MINI OBD Tool to program 2 keys for this car. Total 2 steps: program IMMO via VVDI key tool then program remote manually. Without further ado, let’s get start. Step1. Program IMMO Plug MINI OBD Tool into OBD port, connect to VVDI Key Tool Max. IMMO programming >> Toyota >> Classified by type...
Pogledaj dalje »The car model is a Volvo xc60 from 17/7/2017 half keyless system with CEM R32C R5f64525kfd. Some have problem when reading CEM with autel xp400 also other programmers. Here is the easy solution with the cheapest device- xhorse vvdi mini obd tool. All problem solved with the cheapest device that can someone could imagine remote added successfully without dissembling the CEM. Believe it or no...
Pogledaj dalje »Customer test report & feedback: Yet another example of the VVDI Mini OBD Tool (with key tool max) adding key to a Nissan Sentra B16. I had the warning and head lights turned on to see if my setup was going to be able to get the voltage above 13. Once you get BCM and pin codes I went and selected the Classify by System option and added three keys. My car is from 2012 so the pin is the one that...
Pogledaj dalje »Programmed a Nissan Sentra B16 remote key nicely with the VVDI Mini OBD Tool. *VVDI mini OBD cannot work alone. It should work with VVDI Key Tool Max. In Xhorse App, go to MiniOBD tool, Select Immo Programming->Nissan-> Classify by system->remote matching->Type 1 You can choose to program or delete remote follow system instruction Match a remote 1.Connect to the sy...
Pogledaj dalje »