Only working with one OBD helper can VVDI2 add new keys on VW Passat MQB JC keyless remote key. Immo type: MQB -Johnson Controls Need: VAG OBD helper (with Network Connection) Xhorse VVDI2 One original keyless GO key Xhorse VW MQB Smart Remote Key XSMQB1EN Video Guide Step 1. Use OBD helper to read the MQB – NEC35XX part immo data The original remote key can start the car, press the ” Engine start...
Pogledaj dalje »Here is the guide to use Xhorse VVDI2 VAG key programmer to add key for Passat 2013 with VDO NEC+24C64 dashboard by OBD. VVDI2 adds Passat 2013 Key Guide: Go to VVDI2 software-> select VW car brand Select Key Learn->4th Immobilizer system-VW/Skoda/Seat->Auto detect type VVDI2 read VIN ECU and dash type: NEC+24C64 Click on Diagnosis Click on Read EEPROM/FLASH Select Read eeprom, cli...
Pogledaj dalje »Questions before starting: Now Xhorse VVDI2 VAGid48 is not ready. so i can’t add key passat b6 or any other vag key with id48 chip? It programs passat b6 b7 or other id48 cars by obd? Solution: Not all possible over obd. Some need read out bcm2, some of them need read out with programmer, like vvdi prog or other. Some newer Passat with ECU EDC17, if you have condor key cutting...
Pogledaj dalje »