Prijavi se

Zapamti me

xprog v5.55

Audi A6 ELV 1L59W 3L40K wiring diagram to Xprog

Info for read audi a6 ELV (Steering lock)1L59W/3L40K with Xprog 5.55 (clone) tested by 6 PCB and successfully done without any problemsRead/Write eeprom.successfullyRead/Write flash.successfully MCU SECURED!       Xhorse VVDI Prog the best for this job! A lot of time read ELV from AUDI with vvdi prog.But xprog is mucj cheaper than vvdi prog.

Pogledaj dalje »

Citroen c elysee 2015 Odometer Correction with Xprog

How to:  correct mileage on Citroen c elysee 2015 with xprog m box ecu programmer (here using version v5.55). Original odometer: 186,854 KM   Wiring connection to xprog     Mileage after correction: 71,086 KM   (Click to enlarge) Video guide: https://vimeo.com/302783757

Pogledaj dalje »

How to Repair BMW E46 AUC Sensor ZKE by Xprog 5.55

Not long ago I bought a device called XProg-M with software v5.55. The xprog 5.55 comes with a set of adapters for various blocks processors. (Note: Credit to Pifon077 &) I’ve tried it on a BMW. It’s an EWS 3 immo system with the mask of the 0D46J processor, and on the ZKE low block from the pre-style bmw e46. Adapter for the k-line Who in the subject, he easily calls one very known to many de...

Pogledaj dalje »

How to Tell Xprog M v5.76, V5.70, V5.60 and V5.5

Xprog programmer is updated to Xprog box v5.76!! So, what’s new in Xprog box 5.76 programmer & what’s the differences among xprog box (xprog m) v5.76 v5.70 v5.60 v5.5. Part 1: Similarities of Xprog programmers Xprog m programmer v5.76 v5.70 v5.60 v5.5 all share the authorization as below: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family ...

Pogledaj dalje »

Xprog M Pinout to BMW CAS2 mc9s12dg256c

I tried to read BMW CAS2 mc9s12dg256c by using Xprog V5.55 programmer. It gave me communication error. Can you point me which I need to choose to read or the correct way to read with Xprog-m box? Xprog m ecu programmer reads good on this ecu. Step 1: Xprog > Device > MCU/MPU > Freescale HC(s)2-secured > MC9S12-EEPROM-secured (at very bottom) Step 2: Xprog > File >New Bin File. St...

Pogledaj dalje »

Xprog M Box V5.60 Clone Modification Guide

Purchase & Installation: I bought a xprog v5.60 China clone last month. Very satisfied!!! Only works on Win7x64. At Win7x32 could not see driver. Without the dongle does not work – USB flash drive does not lose !!! Do not connect the dongle with the active antivirals. Disables Netwrok connection NECESSARY !!! Old software from previous versions should be removed and clean the registry! Use you...

Pogledaj dalje »