Prijavi se

Zapamti me

Auto ECU Programmer

China Clone Kess V2 5.017 Red PCB Rework

Bought a Kess V2 5.017 china clone, but no luck. I can try to read but writing is sometimes danger. power supply for akku. When I write flash, the ecu need a lot of power. Searched a lot… thought i should rework the inner board. Then i did something… Transistors: BCR112 MMUN2113 BC817 Murata filters: NFE61PT472C1H9L (connect ground for all of them) Capacitors: 1uF – 35V 220uF – 10V 10uF – 16V tant...

Pogledaj dalje »

Kess 4.036 Protocols vs. Kess V2 5.017 Protocols (Full)

Compared to KESS V4.036, the KESS V2 5.017 new firmware wins in protocol compatibility. KESS 5.017 supports more cars & bikes & trucks,with protocols fully activated, 140 more than v4.036. Look here:        KESS V2 FW 5.017 adds 140 new protocols. Look here:                        APRILIA/ PIAGGO/ GILERA/ VESPA IAW RIU XC2785 KLINE BENTLEY BOSCH ME7.1.1 M&S (BETA) BMC TRUCK MOTOROLA CM...

Pogledaj dalje »

2018 Kess V2 5.017 vs 2017 Kess V2 5.017

2018 Kess V2 firmware 5.017: A lot of improvement on PCB components, compared to Kess made in 2017: 1.the left upper corner and the lower right corner notch size is not the same 2.More thanbuzzer 3.WFs = Infineon, BCR112 NPN Digital Transistor 4.27E = ON Semiconductor NUP2105LT1G 5.6DW = NXP BC817,215 NPN Bipolar Transistor 6.A6c =MMUN2113LT1G / MMUN2113LT3G 7.K5B = BC807-25-7-F PNP Bipolar Transi...

Pogledaj dalje »

Should I have a Kess V2 China clone or EU clone?

Q: How to know my Kess V2 is a China clone or an EU clone? What’s the difference? A: It’s simple; just look purple PCB, then you can be 100% sure its build EU clone. China have green or red PCB. But remember, full reworked green Kess V2from China also works well. And it is low budget clone for start business. Kess v2 EU purple PCB and China green/red PCB can be found here: http://blog.obdexpress.c...

Pogledaj dalje »

BDM Adapters Full Set for KTAG KESS V2 KTM100 Dimsport

BDM Adapters Full Set(22 pics) is used with LED BDM Frame to do chip tuning (Denso, Marelli, Bosch, Siemens) via KTAG KESS V2 KTM100 Dimsport chiptuning tools BDM Adapter Features: Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width. Adapter thickness: 2mm Adapter colour: Green 22 BDM adapters included in a full set: 1 14AM00T01M Bosch 2 14AM00T02M Delphi...

Pogledaj dalje »

How to reset Ktag and Kess V2 ECU tuning tool

I post how to reset Ktag and Kess v2 ecu tuning tool 1.Download version ksuite 2.08 here 2.Buy new sd card 1gb-2gb and format in fat32 ussing this program 3.For kess use this cfg and 4 file Copy on sd card 4 file and in ksuite 2.08 open folder update and copy update folder Connect kess and wait for update all protocol 4. For ktag buy new sd card format in fat32 with program posted and copy 3 file ...

Pogledaj dalje »
UPA USB programmer change mileage in Chery QQ

UPA USB programmer change mileage in Chery QQ

This toturial of correcting digital dash of Chery QQ via 2014 UPA USB(Pinouts attached)  How-to’s: CHERY QQ MILAEGE STOKED ATMEGA 16A RED EEPROM ATMEGA 16A UPA OR XPROG or Beprog + ……… POSTE EEPROM CHANGE KM EEPROM Contain Simple Checksum !!!!   Source: http://www.mileageprogrammer.com/chery-qq-odometer-correction-with-upa-usb-v1-3/

Pogledaj dalje »