VVDISHOP.COM here provides Xhorse MVCI Pro J2534 cable software for free. Including Ford, Honda, Mazda, Nissan, Peugeot, Toyota, Volvo, VAG, Subaru and Renault software. Operating system: Windows 7, Windows 10 and Windows 11 MVCI Pro driver current software version V2.1.8 Firmware version V1.3.3 Make sure update driver to latest version. Free Download MVCI Pro J2534 Software V...
Pogledaj dalje »Xhorse MVCI pro j2534 passthru cable update new driver version 1.3.3. Adding more drivers for different car brands. Software version: V2.1.8 Firmware version: 1.3.3 Download MVCI Pro driver software First update software version, after upgrading the software version, you need to uninstall and reinstall the driver again. MVCI Pro now is compatible with following software VAG ODIS Ho...
Pogledaj dalje »Good news. Xhorse MVCI Pro was tested working with Mitsubishi MUT-III 23061-00 [2023 version] software. NOTE: MVCI Pro here was only used as J2534 adapter because it does not have Mitsubishi driver if as OEM emulator. You need: Xhorse MVCI Pro J2534 Mitsubishi MUT-III 2023.06 software Download ‘common‘ replacement file. Operating system: Win10 64bit How to set up mvci pro j253...
Pogledaj dalje »Here’s a guide on setting up Honda HDS (Honda Diagnostic System) software and xhorse mvci pro j2534 cable on windows 7 64bit. The VCI cable used here is an Xhorse MVCI Pro J2534 that was bought on vvdishop.com. It comes with a regular USB A plug and a built-in USB to serial adapter. Some tried running it on a VirtualBox VM with no luck. Installing it on the laptop itself fixed the cable so...
Pogledaj dalje »Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17. Software version: ODIS-S V23.0.1/ ODIS-E V17.01 License: Included License Standalone and License for all brand Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc) Operating system: Win10...
Pogledaj dalje »Problem: My xhorse vvdi mb tool gave me failed error 3 when during data acquisition procedure. Error image attached. Any solution? Here is the clue. The SSID has successfully calculated the password in the last 12 hours. Use “Query result” function to get password and then write key. www.vvdishop.com
Pogledaj dalje »Problem: I got the xhorse mvci pro passthru to work with GM Tech2win software, after install Tech2win and connect vci, i cannot see mvci pro device. Any idea? Solution: To use software with mvci pro, you have to install the corresponding driver in device manager. Xhorse has not released driver for GM GDS2/Tech2win yet. So it cannot be used with mvci pro. Compatib...
Pogledaj dalje »