Prijavi se

Zapamti me

Autor: utihakou

Launch X431 PROS V4.0 Acceleration Diagnosis for Chevrolet Aveo 2010

Launch X431 PROS V4.0 Acceleration Diagnosis for Chevrolet Aveo 2010

Here we’ve got a Chevrolet Aveo 2010 with abnormal acceleration, and we’re going to show you how to use Launch X431 PROS V4.0 to diagnose where the problem is. Here we can see it presents acceleration around 1400rpm which will consume a lot of fuel. So turn on the device, Manually select the vehicle type and go to ECM diagnostic menu. Select “Read fault codes”. Then we’ve got the DTC: Voltage belo...

Pogledaj dalje »

How to Register & Update Launch X431 PAD VII?

Launch X-431 PAD VII (Global Version Without IP Limitation) is an unexpected high-end diagnostic tool from Launch, comes with the ADAS calibration function + 32 service functions + TPMS service + 8 extended modules functions. New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools and vehicle types. Read the guide below if it’s the first ...

Pogledaj dalje »
Vident iSmart 807Pro & iAuto 702 Pro Update + Function Comparison

Vident iSmart 807Pro & iAuto 702 Pro Update + Function Comparison

Vident iSmart807Pro, the new professional diagnostic tool, now is available on eobdtool.co.uk. It features all-system diagnosis and the most commonly required 25 service functions. We’re gonna tell you the difference between iSmart 807Pro and iAuto 702Pro as many wondered, and guide you on how to update them. iSmart 807Pro and iAuto 702Pro 807PRO 702PRO IMAGE OBDII √ √ Diagnosis System ALL ABS/SRS...

Pogledaj dalje »
Godiag V600-BM Frequently Asked Questions

Godiag V600-BM Frequently Asked Questions

Put together all of the Godiag V600-BM Frequently Asked Questions in this article, including software download, register a member, firmware update, Wifi pairing password, functions, comparison with VXDIAG VCX SE Diagnostic Tool for BMW etc. Godiag V600-BM WIFI pairing password Required About Godiag V600-BM what the WIFI pairing password, because my client still could not make his fugue with bmw so...

Pogledaj dalje »

Xhorse VVDI Prog the ECU Programmer FAQs

Hello there, we’ve collected some frequently asked questions on ECU Programmer Xhorse VVDI Prog. Of course, eobdtool engineers give solutions on them. Hope this could help. Q1: Use VVDI Prog to read Range Rover Velar 2018 ECU, and it says “Incorrect frequency selection”. A1: Connect the 1Kohm resistor between RTXD and VCC. If not working, set the frequency manually. The system file covers all know...

Pogledaj dalje »

How OBDSTAR X300 DP Plus Adds Key for Nissan Sylphy (B18) 2020?

Update! OBDSTAR 16+ 32 Gateway Adapter, for Nissan Sylphy Sentra (Models with B18 Chassis) Add Key and All Keys Lost without Pin Code, now is in stock. It can work with OBDSTAR X300 DP Plus and X300 Pro4 OBDSTAR. Let’s take Nissan Sylphy 2020 for example. Preparation: Connect Renault/Nissan 16+32 cable to OBD port. Unplug the plug in gateway port. Connect the other side of Nissan 16+32 bypass cabl...

Pogledaj dalje »

Godiag GT100 12V (30) 12V(15) What are used for?

Look at Godiag GT100 OBD2 Break Out Box, there are 2 buttons 12V (30) and 12V(15), what are they used for? godiagshop.com engineer replied: 12V (30): Used as a battery power switch for ecu 12V(15): Used as ECU ignition switch Sometimes when reading ECU data, it will prompt to turn on or off the ignition switch. Okay, maybe Godiag GT100 OBD2 Break Out Box manual will help. Hope it helps! Any questi...

Pogledaj dalje »