Prijavi se

Zapamti me

Autor: Rosecotty

AT200, Hextag or Yanhua to Clone BMW MG1 ECU?

What is the best tool to clone BMW ECU MG1 and MD1 and How to do? provides top solutions on this.     1. CG AT200 At200 needs a special cable to read those ECU on bench.  at200 bench read flash and eeprom works great with the adapter. Connection is easy no soldering. AT-200 software will show the detail operation guide. The special cable can read/write ISN from MG1CS003, MG1...

Pogledaj dalje »

Xhorse VVDI Prog Opel Renew File Free Download

Question: I have a few Opel/vauxhall keys that I want to renew. with Delphi, valeo and Siemens types. probably astra h,Corsa d and zafira b. Delphi: 13.188.285 13.189.115 13.387.369 Valeo: 13.149.660 Siemens: 13.213.488     Suggestion: 1) Xhorse vvdi prog can renew keys for Opel Free download GM renew files. Different number key does not matter if its another number the file is the same....

Pogledaj dalje »

Will Autel IM608 Clone Kia Stinger 2019 ECU SIM2K260?

Question: Kia stinger 2019 v6 engine ECU over heat and not detectable. the question can Autel im608 reprogram new ECM (SIM2K260) if not how can i do?             Solution: No, it cannot do programming. You will need a laptop, j-box and subscribe OEM software. Log in for OEM software with labtop         You can code it with th...

Pogledaj dalje »

How to Read BMW F22 ECU Mevd17.2 with AT-200?

CG AT-200 is able to read BMW ECU Mevd17.2 on Bench in 3 minutes. Please read this article for the procedure.   F22 with N20 engine, took 2 minutes to remove from the car.     Connect to one CG AT-200.       Look at the wire connected with CG AT-200 and N20 engine box.       Connect to one adjustable power supply which can ensure stable voltage.   ...

Pogledaj dalje »

Clone Bosch EDC16 MEDC17 by Ktag on Bench

If you are looking for a bench tool mainly for Bosch EDC16/MEDC17 in service mode for the mainly jobs including ECU cloning, mileage correction and some DPF/EGR/DTC off..  Then you have come to the right place.   FYI, Bench mode is a new faster method that allows you to read and write ECUs without opening the cover. Cloning, repairing and tuning are only a few of the services available using ...

Pogledaj dalje »

What is the Best 9S12 Programmer?

Hello everyone, I am looking for a good programmer for mcu 9s12 family that can also work with XEQ, and other masks.       Best 9S12 Programmer Reviews: Worked with everything (VVDI prog, r270, xprog, etc). I know it’s kind of luck, but among 100s of processor I have never killed a single one. With all the respect possible, develop your research and soldering skills. With right pino...

Pogledaj dalje »

Digimaster3 and VVDI Prog Which is Better to read BMW CAS3 eeprom / flash

Have BMW CAS3 immo eeprom flash to read, Xhorse VVDI Prog is the best, Yanhua Digimaster 3 (D3)  is okay too, but need more skills.   Part 1. Use Yanhua Digimaster 3 to read BMW CAS3 eeprom / flash Tips: 1). Do not extend the black and white feeder, cut it short and connect it directly 2). In addition to the feeder line and GND, all other lines must have a voltage output between 4V and 5V. &n...

Pogledaj dalje »