Prijavi se

Zapamti me

Author: Rosecotty

Best Way to Read and Write BMW FEM 95128 95250

With the adapter, you can read and write data from BMW FEM-BDC immobilizer 95128/95256 or instrument 35080/35160. It is safe and stable, without data lost source: http://www.obdii365.com/wholesale/oem-bmw-fem-bdc-immo-data-reading-adapter.html Device compatible: Work for VVDI PROG, UUSP UPA-USB, CG Pro 9S12, Orange5 Connection: BMW FEM-BDC 8Pin Adapter for 95128/95256 Chip UPA and FEM-BDC 8Pin Ada...

Pogledaj dalje »

Fgtech Galletto Read EDC17C19 via OBD or Boot Mode

Question:Can you read and write edc17c19 with fgtech galletto? Anyone have experience ?? I can’t find much info … Maybe somebody done with galetto and can give instructions ???Experience:1). Galletto works with this ECU without any problems, manual for tricore in app folder. 2). It is possible to read it in boot mode with galetto.3). Kess china work on obd… I tested on insignia o...

Pogledaj dalje »

How to Solve Ktag Mandatory update Error by Token Reset?

Look here: Ktag 6.070 token issues SOLVED Ktag version: Ktag firmware version 6.070 Error message: ktag warning: mandatory update within the next 5 programming. connect the tool to the internet and run the update as soon as possible Solution: There are only 5 tokens left, so you need to reset tokens. You need: Reset tokens for Ktag. 6.070 is the Unlimited tokens version, no need desolder chips. We...

Pogledaj dalje »

What Device to Read and Write Mercedes SIM271 ECU?

Question: Need to swap a Mercedes SIM271 ECU. Any idea which tool can do it? Option 1:  BitBox Mercedes SIM271 Module BitBox is the module for reading and writing on the bench by CAN-bus for petrol Mercedes-Benz W204/W212 vehicles with Siemens/Continental SIM271 ECUs. The J2534 Tactrix Openport 2.0 interface, BitSoftware Senselock USB dongle and Universal Bench Cable are required to work with BitB...

Pogledaj dalje »

Read Toyota Hilux Immobilizer 89780-06130 with iProg+ Clone

Toyota Hilux not start, detected B2799 fault code (ECU immobilizer system error) using Launch X431 scanner. Read and repair ECU Immobilizer 89780-06130 data using iprog+ pro clone. Then erase fault codes. Now vehicle starts again. Picture attched below:           http://www.obdii365.com/wholesale/iprog-pro-mileage-programmer.html

Pogledaj dalje »

Orange 5 Read and Repair Sprinter start error

Mercedes Sprinter start error repair. Data correction on ecu eeprom 95p08 and wsp mcu 0j66d performed in 15 minutes, real satisfaction like a “morning quickie” pinout is shown on orange5 programmer help chip pinout section on immo category after reading put ecu and wsp files to sprinter start error software modify those and write back mod-files to respective units… job done.   &nb...

Pogledaj dalje »

Difference Between Xprog V6.12 and V5.84

Here will come the latest Xprog 6.12 full kit. Xprog programmer 6.12 features new authorizations and adapters and new inner board. That is what the difference lie in Xprog 5.84 and 6.12. Now, we’ll talk about the difference: Items in parcel PCB Authorization in detail.. Xprog 5.84 and 6.12 full kit source: http://www.obdii365.com/wholesale/xprog-m-v5-84-box-ecu-programmer.html source: link will be...

Pogledaj dalje »