Prijavi se

Zapamti me

Autor: Rosecotty

IMMO OFF Bosch VAG ME 7.5 using 2018 FVDI

FVDI 2018 abrites commander new test report: immo off for me7.5 vag no issue. First you need to read 95040 original dump data with carprog  Select EEPROM function->95XX->95040 Read and verify Save original dump: name it Immo Ori for example Then open FVDI 2018 software Select Dump Tool function Select Type: ECU ME 7.x Immo Bypass (8P08/95080) Upload original dump read by carprog programmer P...

Pogledaj dalje »

Passat B6 2009 Key Learning using FVDI 2018

FLY FVDI 2018 new test report: Key learning successfully Key learning Passat B6 2009 Fvdi can decrypt pin and cs all 7 byte from ccm only () learning spare key with remote – ok Get pin, cs, 7th byte only from ccm dump Rest can be done via obd Picture attached: http://www.obdii365.com/wholesale/2018-fvdi-commander-full-version.html Feedback from DK member doctore.

Pogledaj dalje »

Xprog read BMW Airbag to remove 240 Internal Error

On the example of the control unit Temic 6577-6900727, he himself MRSZ3 V. 2.5-V. 3.0.  I will show you how to remove 240 “Internal error” error. This airbag has been installed in BMW e39, е38 and е46. For this you need a xprog box programmer that will be able to read the data from this ECU. We just need to record new memory without errors in the Motorola MC68HC12b32 element. See the c...

Pogledaj dalje »

UPA USB or Yanhua Mini ACDP to Read & write Fujitsu MB91F

Q: Hello anyone used this new Yanhua Mini ACDP tool for Fujitsu MB91Fxxx in Honda dash? I’ve also seen some one use UPA USB V1.4 for Fujitsu? A: You have luck with either a UPA-USB programmer or Mini ACDP, to read and write Fujitsu MB91Fxxx. Both are tested successfully by professionals. Here are tips and guides of Fujitsu MB91Fxxx read and write. Option 1: UPA-USB V1.4 reads & writes Fujitsu ...

Pogledaj dalje »

How to enable BMW E46 tripple blinker with Xprog

Here's the DIY guide for those whom want to get tripple blinker on their BMW E46. DIY:  1) you need LSZ module with =>SW3.6 on sticker 2) xprog v5.55 v5.60 or above with mc9s12 bdm adapter 3) sticked dump of ci37 (eeprom virgined, need to be coded after installing ecu to car) wires color legend (follow xprog box connection manual for mc9s12d64): blue – reset red – VCC green – ...

Pogledaj dalje »

Ktag 7.020 Read Mercedes Delphi CRD.11 ECU

Problem: Try to read ecu from Mercedes W204 2.2 CDI 100kW. I use KSuite 2.13 and KTAG EU 7.020 via BDM. Trying Read it via protocol (Delphi DCM3.2 MERCEDES P119) but without success. After identifying ECU … i get response: Hardware configuration not supported: send the LOG files to the software provider. BDM connections is the same as in the HELP in KSuite. How correctly READ and WRITE this ecu by...

Pogledaj dalje »