Prijavi se

Zapamti me

Autor: Emily

VVDI MB disable Benz E260L 2011 key via OBD

Guide to disable Mercedes E260L 2011 key by using Xhorse VVDI MB BGA Tool Mercedes key programmer.   Key information: Original key: 3 button semi intelligent key Frequency: 433MHz Start: insert key to start engine Disable key device: VVDI MB   Procedure: 1.Connect VVDI MB Tool with vehicle via OBD diagnostic socket. Turn ignition switch to ON position. Open VVDI MB BGA software, select E...

Pogledaj dalje »

How to use VVDI2 4.3.0 to program BMW FEM BDC key

Xhorse VVDI2 key programmer V4.3.0 software released BMW FEM/BDC system key programming function.   VVDI2 V4.3.0 update (2017-08-16) *** Require firmware V4.3.0 ************************************************* ********************* ===== VAG V4.3.0 ===== 1. Bugfix===== BMW V4.3.0 ===== 1. Add BMW FEM/BDC system key learning, erase key 2. Add BMW FEM/BDC system reset KM 3. Add FEM/BDC syste b...

Pogledaj dalje »

Xhorse VVDI Prog and Rosfar R-260 which is better

Why should any Tuner, Locksmith, Specifically BMW + LandRover + Mercedes Benz specialist, Tango transponder programmer users should get Xhorse VVDI Prog programmer, full story below. Ever since the good old Rosfar R-260 programmer development project was abandoned back in 2009 nothing compared to it’s reliability managed to complete the task, although many Chinese + European websites continued to ...

Pogledaj dalje »

Xhorse VVDI Prog review on BMW CAS3 CAS4

Here is user working experience of original Xhorse VVDI Prog programmer on BMW cars. (Here talking about BMW only).   Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.   Is a very good tool and for bmw cas4 . I tested today D80 and a m35080v6, and they work perfect. Mine erased D160 (BMW F01 dash) with no problem. Tried to renew bmw e series 868 key. Vvdi programmer c...

Pogledaj dalje »

VVDI Prog is the best tool to Read and Write BMW CAS4?

Here is some experience of which tool is best for reading and writing BMW CAS4, which may help you to get a safe tool…and know can “xprog safe or xhorse better?”.   If you want a cheap tool for CAS4, get a R270 or R280 programmer. But it’s not the best quality and maybe you have to rework the pcb to work better. On a side note, Xprog does not want to do the job very well, I cannot recommend i...

Pogledaj dalje »

VVDI2 and Tango Key Programmer review on BMW VAG

Topic: VVDI2 or Tango? Which is better for auto key programming?   Program keys: VVDI2 via OBD, Tango from dump   If you are going to make keys from dump and reading with a programmer buy Tango. If you are looking to make keys over OBD buy VVDI2 is a good tool for BMW CAS/MB EZS. (read and write MB IR key) Tango more features, VVDI2 good for OBD Better buy VVDI2 with VVDI Prog I personal...

Pogledaj dalje »