Prijavi se

Zapamti me

Auro OtoSys IM600

Which tool for VW/Audi Component Protection?

This is for those looking for a tool for VW/Audi Component Protection… There are three (or more) options of VW/Audi Component Protection. It can be done with FVDI2 commander, Auro IM6000 and ODIS service and the like. Option 1: FVDI2 VAG: Car list: AUDI A4/A5/A6/A8/Q5/Q7 component protection Instrument CAN: Reading security code (PIN) and component protection by OBDII – VW CRAFTER Component Protec...

Pogledaj dalje »

How to Read EEPROM ST95040 using Auro OtoSys IM600 and UP400

Auro OtoSys IM600 is a diagnostic, key programming and ecu coding 3-in-1 tools. Here’s a real test report on reading EEPROM ST95040 together UP400 eeprom adapter. Remove ecu Connect IM600 with UP400 adapter and computer Select Programming->Chip Read & Write->EEPROM->ST->M95XXXX->M95040->View Diagram             OtoSys IM600 will show you id...

Pogledaj dalje »

Read Audi 2010 MED 17.5 ECU Data with Auro OtoSys IM600

New test report from Spanish technician: Reading of CS, MAC code and pin of ECU Audi 2010 MED17. 5 with Auro Otosys im600 tablet diagnostic and programming tool via direct method. Remove ECU from vehicle Connect IM600 and OtoFlash J2534 reprogramming adapter Select IMMO->Audi->Engine->MED17->Read IMMO data using direct method Jumper wire operation needs to be performed on the ECU Press...

Pogledaj dalje »

BMW FEM BDC Renew using Auro OtoSys IM600

This manual introduces how to conduct BMW FEM/BDC ECU Renew on Auro OtoSys IM100/IM600 key programmer.     Two options are available when accessing FEM/BDC Renew:  Copy Data Update : When the immobilizer information of the vehicle can be read from the original FEM/BDC module, perform this function to read the information and write it into the replacing FEM/BDC module.  Calculate Data U...

Pogledaj dalje »