Prijavi se

Zapamti me

Autel XP400 Pro

Porsche EEPROM Programming with Autel IM608 Pro

Autel IM608 Pro is not only an on-vehicle programmer but also an EEPROM programmer. One tablet supports multiple ways to replace car keys, which can efficiently support your repair works. This post will show you that how to use it to program EEPROM on a Porsche. EEPROM is hard to navigate. There are two scenarios for using EEPROM. One is if you want to add a new key using certain vehicles like BMW...

Pogledaj dalje »
Autel IM608 Pro Add New Key+ All Keys Lost on Mercedes- Benz

Autel IM608 Pro Add New Key+ All Keys Lost on Mercedes- Benz

We all know that Mercedes keys are much more complicated to program than other car keys. So today we will show how to add a new key and do all keys lost for Mercedes-Benz using Autel IM608 Pro plus XP400 Pro. Programming keys to a Mercedes poses a tough problem for techs, for most models you need to use the MaxiFlash JVCI and the XP400 Pro. When all keys are lost, you should use the Autel G box. P...

Pogledaj dalje »

How to Clone Volvo S60 RENESSA CEM?

Here are the tips on Volvo S60 CEM cloning.   For example: On a Volvo S60 2011 T6 with Changing CEM Chip is RENESSA: 32R R5F64524 You can read all dumps: P-FLASH, D-FLASH, EPROM  with Xhorse VVDI Prog or Autel XP400 Pro. VVDIProg and XP400 all failed to write and received error in erase.             Solution: IO Terminal or SMOK are good for this Job.   With...

Pogledaj dalje »

How to Read Write BMW EWS3 with Autel XP400 Pro?

Although BMW EWS is a very easy job can be done by cheap AK90 at $30,  it is just nice to know Autel MaxiIM can do EWS3 if happens to have it in hand.   Which Autel can do? Autel IM608/IM608Pro + XP400 Pro *XP400 cannot read/write EWS3. Require XP400Pro. What adapter to use? Ews3 adapter (APB114 EWS3 adapter board) the tool tells you what to connect the wire to APB114 EWS3 adapter is included...

Pogledaj dalje »

Read BMW CAS2 2K79X EEPROM with Autel IM508 XP400 Pro

To read EEPROM for one BMW CAS2 >2K79X>RW, all you need is one Autel MaxiIM IM508 & XP400 Pro. All will be done on Bench, and with the on-screen instructions, the whole process is rather simple and easy.   Look at the hardware and cable connection: Autel MaxiIM IM508 BMW CAS2 board Autel XP400 Pro ( the 2nd generation of Xp400), connected to IM508 with APA109 cable.   Connection met...

Pogledaj dalje »