Prijavi se

Zapamti me

Carprog

J-Link Wiring Connection and Programming Guide with Carprog

Now make the J-Link connection to Carprog programmer according to the scheme and with the least possible piece of wire that is important We open the program to go to options / project settings and put it all as the pictures now file / open data file and select our new firmware finally we select target / connect / program. Jlink interface pinout JTAG J-link to carprog       J-link co...

Pogledaj dalje »

Carprog OBD changes mileage for Volvo 2000-2010

Possible to use Carprog for Volvo dashboard emulator? Change km…   Yes. This is Carprog volvo S60 dashboard testing                                           Carprog and Volvo S60 details can be found at http://blog.obdii365.com/2018/03/15/carprog-clone-and-volvo-s60-dashboard/ Thanks to obdii365.com   You need: CarProg Volvo odometer correction software Additional cables are required – A1+ (A1 PL...

Pogledaj dalje »

How to use Carprog to change Kia Cerato 2010 93C66 mileage

How to change KM on a Kia Cerato year 2010 using carprog. Procedure: Remove dashboard IC from the car Open it and find internal EEPROM memory, select same from the list Use carprog A4, A5 or A6 (due to situation) adapter to connect to EEPROM In some cases you will need to remove (desolder) EEPROM from the board Open carprog software, select mileage function->KIA->AutoDetect-> select eepro...

Pogledaj dalje »

Change Mileage on Toyota Prius 2006 93C66 with Carprog

How to change odometer on a Toyota Prius 2006 with eeprom 9C366 using carprog v8.21 (version now v10.93) ecu programmer. Change KM Toyota Prius 2006 93C66: Remove unit from car. Open it and find internal 93C66 EEPROM memory inside. Use the Carprog A4, A5 or A6(due to situation) EEPROM adapter and change mileage. In most cases need to remove EEPROM from the board. Open carprog full software Select ...

Pogledaj dalje »

IMMO OFF Bosch VAG ME 7.5 using 2018 FVDI

FVDI 2018 abrites commander new test report: immo off for me7.5 vag no issue. First you need to read 95040 original dump data with carprog  Select EEPROM function->95XX->95040 Read and verify Save original dump: name it Immo Ori for example Then open FVDI 2018 software Select Dump Tool function Select Type: ECU ME 7.x Immo Bypass (8P08/95080) Upload original dump read by carprog programmer P...

Pogledaj dalje »

Carprog clone Change Odometer on Peugeot 3008 2012

Purpose: CarProg Peugeot odometer correction   Car: Peugeot 3008 2012   Hardware: CarProg china clone   Software: Carprog v8.21 (now the newest sw is version 10.93)   Procedure:   Select DASHBOARD-> PEUGEOT-> AUTOTECT V0.1-> 3008-> 3008 95080 V0.4 Go to EEPROM and read eeprom data, then save km data Read the old KM and write a new KM Read eeprom data and save n...

Pogledaj dalje »

How to use Carprog and A10 Adapter to Read MB91F06X Dash

Here are pinouts and guides of read instrument cluster MB91F06X (MB91F060, MB91F060BS, MB91F061, MB91F061BS, MB91F062, MB91F062BS, MB91F067, MB91F067BS). Done with Carprog and A10 adapter. FYI, what is instrument cluster in a car? In an automobile, an electronic instrument cluster, digital instrument panel or digital dash for short, is a set of instrumentation, including the speedometer, that is d...

Pogledaj dalje »