Prijavi se

Zapamti me

Fgtech galletto

VW Golf PCR 2.1 EGR OFF with Fgtech and WinOLS

VW Golf TDI EGR OFF Simos PCR 2.1 completed successfully Unlock Simos PCR 2.1 with fgtech galletto v54 on bench ERG off with WinOLS ecu remap software Clear fault codes using vag scanner vcd-s or odis photo attached:                     Related post: https://fgtechgallettov54.blogspot.com/2017/06/use-fgtech-galletto-clone-to-write-pcr-21.html

Pogledaj dalje »

Fgtech Galletto Win7 Win8 Win10 Software Installation

Here is the detail guide to install Fgtech Galletto 4 V54 master ecu programmer software driver on Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10 respectively. Part 1.Operation System Requirements Part 2. Install FGTech EOBD2 Software setup Part 3. Install Window XP Driver   Part 4.Win7/Win8/Win10 Driver Installation Part 5.Enable Driver for Window 8 Part 6.Enable Driver for Win8.1 P...

Pogledaj dalje »

Fiat Marelli ECU Wiring Pinouts to Fgtech Galletto

Look here: how to connect Fgtech galletto v54 master with a Marelli ECU on Fiat Marelli MJD 8F2  8DF  8DS – MPC5565 – FIAT DIESEL Marelli MULTIAIR 8GMF.A5 – MPC5565 – FIAT BENZINA Marelli MULTIAIR 8GMF.01 – SPC5553 – FIAT BENZINA MARELLI 7GF – MPC5554 – FIAT How to read/write Marelli ECU at a decent price: Working Fgtech 4 china clone: http://www.obdii365.com/wholesale/v54-fgtech-galletto-4-master...

Pogledaj dalje »

Volvo V70 EDC15C11 Read and Write by Kess, Ktag, MPPS or FgTech?

Here are optional solutions of Volvo V70 EDC15C11 ECU read and write using different ECU programmers, incl. Kess V2, Ktag, MPPS cable, FgTech Galletto 4 V54. Car: Volvo V70 D5 2004 163hp Ecu: I think the car has either a EDC15C2 or EDC15C11 ecu. (K-suite states EDC15C2) Option 1: You can use Fgtech Galletto V54 Rread/write work only in bootmode at this car. volvo s60 D5 163 hp euro 3 with edc 15c1...

Pogledaj dalje »

Read and Write Bosch ECU MED17.5 with Fgtech Galletto

The ECU is built on the Infineon Tricore TC1766 processor. In the chip of the processor is a flash memory in volume of 1504 bytes and EEPROM in 32 bytes. There are two ways to read-write a block: via the OBD connector and through the BSL bootloader (the so-called boot-mode) Each of the methods has its pros and cons. Read-write via OBD : Pros: -fastly- no breakdown of the ecu is required Cons: -it ...

Pogledaj dalje »