Prijavi se

Zapamti me

fgtech

Fgtech 0475 Driver Win7 Win8 Win10 Installation

People have succeeded to run Fgtech Galletto V54 firmware 0475 software on Windows 7, Windows 8 and Windows 10.  For firmware 0475 only, didn’t test on firmware 0386.   Credit to all contributors: obdii365.com, 306 t16,  nusa1979   Install Fgtech 0475 on Windows 7 Install Fgtech 0475 on Windows 8 Install Fgtech 0475 on Windows 10         Fgtech 0475 Windows 7 Installa...

Pogledaj dalje »

What Device to Read and Write Mercedes SIM271 ECU?

Question: Need to swap a Mercedes SIM271 ECU. Any idea which tool can do it? Option 1:  BitBox Mercedes SIM271 Module BitBox is the module for reading and writing on the bench by CAN-bus for petrol Mercedes-Benz W204/W212 vehicles with Siemens/Continental SIM271 ECUs. The J2534 Tactrix Openport 2.0 interface, BitSoftware Senselock USB dongle and Universal Bench Cable are required to work with BitB...

Pogledaj dalje »

Kess V2 and Fgtech which to read BMW M5 E60 EDC17?

Purpose & problem: I have been remapping a 2006 BMW M5 E60. I have heard the MPPS is not suitable for this so decided to buy a better tool. Not sure if I should go for a Galletto v54 or the Kess V2. Any advice would be great, ideally I would like to get the one that covers most cars via OBD.   Advice from users: Kess V2 is better solution.   EDC17 safer to do on the frame, and some o...

Pogledaj dalje »

Fgtech 0475 Read and Write Renault Siemens Sirius 32

Fgtech galletto v54 new fw0475 master clone has been tested to read and write Renault Megane Siemens Sirius 32 ecu without issue. Set up Fgtech v54 software Select  Car->Renault->Megane ->1.4/1.6/2.0 16V Sirius  32 Siemens Sirius 32 Renault K-line read and write Read ECU data Save ECU data Open ECU data just saved Writing ECU If fgtech 0475 prompts Checksum not supported, press YES to con...

Pogledaj dalje »

Fiat Marelli ECU Wiring Pinouts to Fgtech Galletto

Look here: how to connect Fgtech galletto v54 master with a Marelli ECU on Fiat Marelli MJD 8F2  8DF  8DS – MPC5565 – FIAT DIESEL Marelli MULTIAIR 8GMF.A5 – MPC5565 – FIAT BENZINA Marelli MULTIAIR 8GMF.01 – SPC5553 – FIAT BENZINA MARELLI 7GF – MPC5554 – FIAT How to read/write Marelli ECU at a decent price: Working Fgtech 4 china clone: http://www.obdii365.com/wholesale/v54-fgtech-galletto-4-master...

Pogledaj dalje »

Read VAG EDC17CP44 with Kess v2, Ktag, or Fgtech ?

Possible to read/write VAG ECU EDC17CP44 via OBD? And which tool can do it? Here you go.   EDC17CP44 details: Information: BSL130 no BSL131 yes BSL132 yes BSL-ADP required   ECU pins: Use Plug – Pin 12V T91 – Pin 5 Ign T91 – Pin 50 Gnd T91 – Pin 1 Can+ T91 – Pin 79 Can- T91 – Pin 80 S1 T105 – Pin 18 S2 T105 – Pin 21   Pictures: Vehicles with ECU EDC17CP44: VEHICLES / INFO ECU TYPE P...

Pogledaj dalje »