Prijavi se

Zapamti me

ktag v7.020

How to Install LED BDM Frame Kit for Kess Ktag?

This article is a guidance of the installation of LED BDM Frame and BDM Frame for Ktag Kess. Why do we need BDM Frame? In some cases we have very small space for soldering, so the frame allows us to avoid soldering in most BCM modules. How to install BDM Frame for Ktag Kess? There are 4 holes on the base, so first put 2 flat screws on 2 holes on the same side and tighten them by 2 bars. Put the bl...

Pogledaj dalje »

Ktag Clone Peugeot 206/207 HDI BOSCH ECU EDC16C3 on Bench

Our KTAG V7.020 can easily decrypt and read the password and it automatically unlocks the Tricore sectors so it can read and write both FLASH and EEPROM. If you are looking for a bench tool mainly for ECU programming(car/truck/motorcycle…) and that supports DENSO, GPT, NEC Protocols well with limited budget, this Ktag less than 100$ maybe your choice. Notes: 1. Do Not update online, only support u...

Pogledaj dalje »

Great Wall EDC16C39-6.H1 Immo Off with Ktag 7.020

Vehicle:  Great Wall BOSH EDC16C39-6.H1 EEPROM 95320 Purpose: IMMO off Device to use: Ktag V7.020 master clone  Procedure: People usually will flash Eeprom 95320 dump and connect PIN 68 and PIN 74 to turn off immo. But it is not working on this model. Because MPC Flash in CPU limit the function. Although Eeprom 95320 flashing does immo off, CPU will not execute order. You need to flash both IC M58...

Pogledaj dalje »

Bosch MEV17.4.2 Reading with Ktag 7.020 on Bench

How to: read a Citroen C4 1.6 gasoline engine Bosch MEV17.4.2 from PSA group. And was read in boot mode using KTag 7.020.   Bosch MEV17.4.2 == MEV174 reading with Ktag Open ECU Follow wiring diagram to connect ECU with K-tag Open Ksuite software Select Bosch MED 17.4.2 Tricore    Select Plug 305 Bosch MED174/MEV174 IROM TC1767 PSA (P305) Read ECU data Ktag 7.020 read MEV17.4.2 data success. S...

Pogledaj dalje »

4 LED Ktag V7.020 EU Online Version PCB Display

2018 new Ktag Firmware V7.020 EU version with red PCB and 4 LED indicators is now rolled out in What’s new: Ktag V7.020 Red PCB EU Version With 4 LED Indicators: Murata filter  Buzzer protect ECU/KEY/Power/Data LED Indicator KTAG 7.020 New Added Function & Features: Latest Firmware V7.020,Software Ksuite V2.23 Multi-Language: Italian Dutch English French Portuguese Spanish Online...

Pogledaj dalje »

Ktag v7.020 deleted DPF, EGR, DTC successfully

Finally received my Ktag package. It’s firmware 7.020 master version. and tested on three cars today today.   See my Ktag v7.020: looks good Now, i’ll chip in some words of my experience.   Three ECUs i’ve tested: ISUZU ECU Transtron 4JJ1 Mazda Denso ECU RF8P Hino 700 Denso Diesel ECU   Attached pictures here. Here you go…   Transtron 4JJ1 SH7058 ISUZU (P430): without sensors K...

Pogledaj dalje »