Prijavi se

Zapamti me

mpps v18

How to Restore a BOSCH EDC17 ECU After Goes wrong with KTM Bench?

Guide on how to restore a BOSCH EDC17 ECU after a boot mode flash goes wrong with KTM Bench programmer, I have full backup with password extracted with ktm bench but ecu f flasher tell me wrong password. Credit to: A.N. Idiot (A.K.A. PsiDOC)   This guide is something I have cobbled together after a brick situation occurred on a BMW EDC17CP45 ECU whilst in boot mode. Some bits may be in the wr...

Pogledaj dalje »

Ktag 7.020 or MPPS V18 to Read Opel Corsa Marelli 6JO?

Hello, Possible to read Opel Corsa with Ktag clone, the red board? I am using Ktag 7.020 for Marelli 6JO Opel Corsa. Failed to read out ECU data. It says connection error. Help please.   Obdii365.com tech support: Hello, Opel Corsa comes with ECU Marelli 6JO. For this ECU, you’d better go with a MPPS cable. MPPS V18 is good at Marelli. Covers more Marelli ECUs than Ktag Look at the customer r...

Pogledaj dalje »

Will MPPS ecu flasher do ECU checksum?

MPPS V18 ECU Checksum Tutorial:   What is a checksum: A checksum is a block of digital data that is used to verify the contents is of the memory is correct.  Upon modifying the data the correct checksum must be calculated to ensure proper operation of the Engine Control Unit (ECU).   What happens if I checksum a file that was already checksummed: It will not cause a problem if a file is ...

Pogledaj dalje »

MPPS V18 OBD Read Bosch PSG16 ECU Pinouts

Question: I’m want to do an EGR delete on a Vauxhall zafira A with the ECU PSG16. What are the steps to read this ECU through OBD and what tools are needed?   Solution: You can it’s with carprog and MPPS. Carprog only eep, Mpps directly to the pump. Mpps v18 can read and write on the pump directly. With gm tech2 you can do it obd.   PSG16 ECU MPPS V18 pinout and connection: Reading the r...

Pogledaj dalje »

MPPS V18 CN Clone purchased- Success and failure

This is my unit recently bought, maybe the last review of CN  MPPS V18 clone. Pictures:    I used it for my workshop. This is so far what i did.   TD5 Landrover: tricore read and write edc17c10 and unlock pcr2.1 Fiat Doblo 1.3 mjet mjd6f3: obd ead and write ok Range Rover edc17cp11: boot ead and write ok Magneti marelli 6F0: full read/write by OBD MPC,Flash EEPROM OK! EDC17C10 PSA: boot mode,...

Pogledaj dalje »

OBD read EDC17C46 ECU with Kess V2 or MPPS V18

What’s the difference of EDC17C46 OBD reading by MPPS V18 & Kess V2 master? Look here:   With Kess v2: You can write boot readout or frf->bin file with kess obd, but you need to choose correct protocol. Kess will automatically do tprot patch in this procedure. But you need to know what you are doing. Checksum correction from alientech is sometimes a little bit poor if you change someth...

Pogledaj dalje »

MPPS V21 Read and Write Peugeot MED17 ECU Success

Mpps v21 software crack download: 100% worked on Mpps v18 hardware https://mega.nz/#!9CAFhTpD!NRtyud2wia9n7-XSOnxTCvtDf69re1oT7V2SlnioqyU MPPS V21 software crack + MPPS V18 hardware clone = MPPS V21 tuning tool: http://www.obdii365.com/wholesale/mpps-v18-main-tricore-multiboot-cable.html MPPS V21 price: $99 MPPS V21 in US: http://www.obdii365.com/wholesale/mpps-v18-main-tricore-multiboot-cable.htm...

Pogledaj dalje »