Prijavi se

Zapamti me

OtoSys IM600

How to Read EEPROM ST95040 using Auro OtoSys IM600 and UP400

Auro OtoSys IM600 is a diagnostic, key programming and ecu coding 3-in-1 tools. Here's a real test report on reading EEPROM ST95040 together UP400 eeprom adapter. Remove ecu Connect IM600 with UP400 adapter and computer Select Programming->Chip Read & Write->EEPROM->ST->M95XXXX->M95040->View Diagram             OtoSys IM600 will show you identifi...

Pogledaj dalje »

Read Audi 2010 MED 17.5 ECU Data with Auro OtoSys IM600

New test report from Spanish technician: Reading of CS, MAC code and pin of ECU Audi 2010 MED17. 5 with Auro Otosys im600 tablet diagnostic and programming tool via direct method. Remove ECU from vehicle Connect IM600 and OtoFlash J2534 reprogramming adapter Select IMMO->Audi->Engine->MED17->Read IMMO data using direct method Jumper wire operation needs to be performed on the ECU Press...

Pogledaj dalje »

BMW FEM BDC Renew using Auro OtoSys IM600

This manual introduces how to conduct BMW FEM/BDC ECU Renew on Auro OtoSys IM100/IM600 key programmer.     Two options are available when accessing FEM/BDC Renew:  Copy Data Update : When the immobilizer information of the vehicle can be read from the original FEM/BDC module, perform this function to read the information and write it into the replacing FEM/BDC module.  Calculate Data U...

Pogledaj dalje »