Prijavi se

Zapamti me

VVDI Prog adapter

Xhorse VVDI Prog 95XXX EEPROM Chip Not Connected Solution

Here is our suggestion to solve vvdi prog problem reading st 95xxx eeproms.   The problem goes like this: I have problems read st 95xxx eproms. Have tried 9508. 95128. 95256. 95320. All soldered to xhorse vvdi prog EPROM adapter. every single leg is clean, soldered perfectly but not working reading error, write say ok but all 00 i tried with 12v connected and unconnected. Now difference. Here...

Pogledaj dalje »

VVDI Prog MCU Cable V1 V2 or V3 to Read Benz W211 HC12

Question: I have w211 HC12 EIS 211 545 10 08 (3K91D). Xhorse VVDI Prog manual says use cable V3 but on picture with connection there is V1 cable (it tell to use V2 or modify V1). In VVDI Prog software, I select EIZ-W211 (HC12), it failed to read and said chip crack failure.     So which cable do I need to use? Need be 100% sure which cable to use, in order to avoid (or minimalize) risk w...

Pogledaj dalje »

VVDI Prog Failed to Read BMW 5 Series ECU N55 Solution

Question: Xhorse VVDI Prog failed to read ECU N55 MEVD17.2.4 from a BMW 5 series 2014.  I am using the new Bosch ECU adapter. Is the server down or am I doing something wrong? Solution: With vvdi prog need boot pin like picture below With Autohex or Yanhua Mini ACDP can do with adapter without boot pin (N55). http://www.vvdishop.com/service/vvdi-prog-read-bmw-n55-ecu.html

Pogledaj dalje »

VVDI Prog Read Immo 95128/95256 & dash 35080/35160 No Soldering

BMW FEM BDC 95128/95256 Chip Data Reading 8Pin Adapter, working together with Xhorse VVDI Prog, can read & write Immo 95128/95256 & dash 35080/35160 safely without soldering & and stably without losing data. This is BMW FEM BDC 95128/95256 Chip Data Reading 8 Pin Adapter: Open VVDI Pro 4.8.7, choose 1-EEPROM & Flash -> ST -> M95128 Select <EEPROM> initializing chip &nbs...

Pogledaj dalje »

Program Mazda 626 Lucas Immobox 2000 Key with VVDI Prog and VVDI2

How-to: Mazda 626 Immobox 2000 Lucas 34AS(MC68HC05) key programming with Xhorse VVDI Prog and VVDI2 key programmer. Step 1: Read IMMO data with VVDI-Prog Open Immo box Disassemble eeprom chip MC68HC05B32 from board       Solder eeprom chip to VVDI Prog XDPG15 MC68HC05 adapter    Open VVDIProg software Select MCU->Motorola MC68H->MC68HC05B32(0D60J) Read and save immo data ...

Pogledaj dalje »

Program Renault Clio 1997 C46CM6 Key via EEPROM

All keys lost on renault clio from 1997 , got pin code from immo box need to eeprom ST C46CM6 using xhorse vvdi prog programmer. Picture attached:       Solder ST C46CM6 chip to vvdiprog EEPROM adapter Save eeprom data Calculate pin code and program transponder with Renault obd programmer  http://www.vvdishop.com http://blog.vvdishop.com/vvdi-prog-read-renault-clio-1997-eeprom-st-c4...

Pogledaj dalje »

Xhorse VVDI Prog TMS370 PLCC28 Adapter and Pinouts

Xhorse VVDI Prog programmer adds TMS370 (PLCC28PLCC44PLCC68) adapter since V4.6.6 software released. The adapter now is available in vvdishop.com. Xhorse TMS370 Adapter: + Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADPATER) +TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A, TMS370C042A, (Need TMS370(PLCC44) ADPATER) +TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C...

Pogledaj dalje »