Prijavi se

Zapamti me

VVDI Prog

Alfa BCM MC9s12DG256 Pinout to Xhorse VVDI Prog

Question: Any option to get pinout BCM for carprog or vvdi prog? Can’t find anything ? I have this Magneti Marelli BCM alfa brera. MCU MC9s12DG256 CPVE 0L01Y QQPRO752     Any idea how to connect it ? Any option for pinout ? Solution: Smok or I/O terminal can read Alfa 159 by OBD. Don’t use carprog. Use Orange5, Upa or vvdiprog. It is not so difficult to follow the pins, and to a spot to ...

Pogledaj dalje »

Xhorse VVDI Software Failed to Install on Windows 10 Solution

Problem: Anyone had problems with VVDI MB on Windows 10? I have version 5.03. However, the application keeps deleting itself! I am told by our computer support it is not anti-virus issues. I have tried to update to 5.05 but it says it is not compatible with my computer. Dell E5450 i5. Any ideas? Solution: Xhorse engineers have tested vvdi tools software on WinXP, Win7, Win8 and Win10 all ok. If yo...

Pogledaj dalje »

How to Read Audi EDC17CP54 ECU with VVDI Prog?

Xhorse VVDI Prog absolutely correct read flash dump on Audi EDC17CP54. Check wiring connection to EDC17CP54 ECUs: Audi A6 (C7) EDC17CP54 (TC1793) (2015/2017) Audi A7 (4G) EDC17CP54 (TC1793) (2014-2017) Audi Q7 (4M) EDC17CP54 (TC1793) (2015) FYI: 1) KTM Bench read it not problem Here’s the Audi Q7 3.0 2016 VAG EDC17CP54 Pinout for Bench read on KTM Bench worked out without problems with this connec...

Pogledaj dalje »

Xhorse VVDI Prog Read Siemens Kessy Module 93C86 In Circuit

Some people are having hard time with 93c86 in circuit, and even problems with it out of circuit on adapter, especially on early siemens since no diagram in xhorse vvdi prog for soldering wires to board only continental. Usually vvdi prog failed to read all the all the 93C86 under ST and other manufacturers. Here’s the tip to do kessy modules 93C86 Touareg/A8/Porsche in circuit with vvdi-prog if f...

Pogledaj dalje »

VVDI Prog Read N20 N13 ISN with DME OBD Cloning Cable

How-to: Read ISN From ECU BMW N20/ N13 with Xhorse VVDI Prog and MOE Cable without soldering. The MOE BMW DME OBD ISN Cloning Cable comes with multiple adapters B38 – N13 – N20 – N52 – N55 – MSV90 To use with the VVDIPROG programmer For example: Read N20 ISN code from ECU Connect N20 N13 adapter with Bosch ECU adapter Connect Bosch ECU adapter with vvdi-prog In VVDI prog software, select Type Bosc...

Pogledaj dalje »

VVDI Prog Read and Write ST10F275 MCU

Read and write processor ST10F275 with Xhorse VVDI PROG programmer successfully. In vvdiprog software, select MCU type->ST10F->ST10F275 Check connecting wiring diagram   Follow wiring diagram to connect ST10F275 mcu with vvdi-prog and mcu reflash cable.     Read ST10F275 in process Read ST10F275 mcu success. Save data. www.vvdishop.com

Pogledaj dalje »