Prijavi se

Zapamti me

VVDI2 VAG

Program Audi S5 2010 BCM2 Smart Remote Key with VVDI2

How to: Program Smart Remote to a Audi S5 year 2010 5th generation immobilizer BCM2 with Xhorse VVDI2 key programmer. Step 1:Read BCM2 data Open VVDI2 software->Audi->Key Learn->5th Immobilizer system Precedure to read BCM: choose Read by OBDII Press Read BCM2 data (OBDII) Insert working key into ignition and switch on before continue If working key is already in car, take out and insret ...

Pogledaj dalje »

How to use VVDI2 VAG to Re-adapt Key Audi A7 keyless Go

As titled, here’s the test on re-adapting key on Audi A7 Keyless Go using  Xhorse VVDI2 VAG key programmer. Insert working key into VVDI2 Open VVDI2 VAG software Select Key Learn->5th Immobilizer system->Check key status The current key has keyless. The key is locked. Insert another key into VVDI2 key programmer, check key status again The current key does not have keyless. The key is not lo...

Pogledaj dalje »

VVDI2 2015 Skoda Octavia MQB Mileage Correction Guide

Here’s an example of odometer (mileage) correction in the car Skoda Octavia 2015 (VAG MQB platform). The procedure is carried out with the Xhorse VVDI2 VAG key programmer. Original mileage: 66,612KM Open VVDI2 software Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO) Click on Diag to load vehicle information Instrument version 2210 Instrument t...

Pogledaj dalje »

Program Skoda Octavia 2015 MQB Keyless Go with VVDI2 VAG

Here’s an example of programming a smart key in the car Skoda Octavia 2015 (MQB platform VAG) using Xhorse VVDI2 VAG key programmer. Open VVDI2 VAG software Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO) Click on Diag to load vehicle information Instrument version 2210 Instrument type: MQB NEC35xx Continental VDO Read EEPROM data and save Swi...

Pogledaj dalje »

VVDI2 Golf 5 EDC16U1 K-line Data Upload Failed Solution

Problem: Hi, I have with Xhorse vvdi2 vag v5.5.0 problems with edc16u1 ecu and dashboard. It can’t read golf 5 2005 year. Something not ok with it It looks like K line not working. picture attached: Error “Can’t connect to device. Switch ignition OFF/ON and retry” Error “Non-standard upload data failed” Solved!!! Here’s the customer solution: I test it this morning and all works fine now. I remove...

Pogledaj dalje »

Program Seat Leon MQB Smart Remote Key using VVDI2

A Spanish VVDI2 VAG user has successfully programmed a remote smart key on a Seat LEON MQB system. Here’s some operation steps provided. At this moment, VVDI2 MQB key is not available yet, so he used 5G0959752BC from ali (Works for all the cars, VW Polo need to use 5G0959752BB.) Open VVDI2 VAG software Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continenta...

Pogledaj dalje »

VVDI2 Change Seat Leon III MQB mileage

New test feedback: done Seat Leon 3 / Golf 7 MQB  mileage correction with Xhorse VVDI2 VAG 5.2.1 success. Open VVDI2 software Select Seat->Key Learn->Immobilizer of instrument platform MQB-> instrument  with NEC+24C64 MQB key Click read data, auto detect vehicle type etc Click on Read KM Current mileage: 500KM check odometer on instrument, it is the same Enter the mileage you desired:1180...

Pogledaj dalje »