Prijavi se

Zapamti me

VVDI2

Read BMW MSV80 DME ISN using Xhorse VVDI2

BMW MSV80 ISN reading using Xhorse VVDI2 successfully. The process takes about ten minutes.   Connection diagram is on the right of the vvdi menu. Pin 44 and 22 of the left connector No need to connect resistors.                 If vvdi2 failed to read MSV80 DME ISN,  you need to open it and move some components. You can also Add the components from ano...

Pogledaj dalje »

Top 3 Tools to Remove VAG Component Protection

Component Protection (CP) is a scheme by which some control modules must be adapted to the vehicle with the help of the servers on VAG’s mothership. It first arrived in the bigger Audis in the mid 2000’s (4E/D3 A8, 4F/C6 A6) and spread slowly from there. This means that a new or used replacement module that has CP will not be fully functional until it is matched. It’s ostensible purpose was to pre...

Pogledaj dalje »

2009 Audi A3 All Keys Lost by Xhorse VVDI2 VVDI Prog

Audi A3 2009 all keys lost is done by xhorse vvdi prog and vvdi2. Save abs coding with vvdi2. (go into diagnostics and see coding option) Remove clocks read 24lc32 Create service eeprom Put clocks back Write original eeprom back via obd Read immo data Save immo data Generate dealer from immo data Learn key with vvdi2. Job done. Vvdi prog used clip normal but hit miss with clip but this one was ok....

Pogledaj dalje »

Xhorse Audi 754J Smart Key 6 EEP Config Error Solution

Problem: When I generate Audi A6 2013 remote with xhorse vvdi 754J remote, vvdi2 gave 6-EEP config error. I use the correct 754J AD006 ver1.1 remote and not XM38. Any idea?         Solution: In Transponder Programming function, go to Set Parameters dialog, set antenna gain value to  0, 1, 2, 3 respectively and apply. Then generate remote again. When gain value smaller, the tran...

Pogledaj dalje »

Possible to Program VAG MQB49 5C Key with Xhorse?

Questions: Q1: Can i make key VW Jetta 2020 and tiguan 2020 MQB49 5c with xhorse vvdi2? Q2: How can I make key for Immo 5C with VVDI2, how to calculate? Q3: How do i get immo data mqb49/5c on vvdi key tool plus?         Answer:   Only  Johnson Control instrument is supported by xhorse. Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they ca...

Pogledaj dalje »

How to Add VW Caddy 2018 MQB48 Key by Xhorse VVDI2

How-to: program spare VW Caddy year 2018 MQB remote key using xhorse vvdi2 vag key programmer.   Here the customer wanted 3 remote spare keys (4 in total). Tried ALL of Xhorse and Keydiy without success. The remote didn’t work for anyone!!! That’s why an original was programmed. In addition, have programmed 2 keys without remote using XT1M MQB chip. The customer had thus received his 4 keys. ...

Pogledaj dalje »

Program VW MQB Locked D70F35xx by Xhorse VVDI PROG + VVDI2

Xhorse VVDI PROG + VVDI2 is able to read & decrypt 2016 Volkswagen Polo MQB locked D70F35xx immo data on bench. Need to activate VAG MQB48 License and disassemble MQB module from vehicle for pin lifting.       Following are the quick steps. Step1. Read Data via VVDI PROG Lift FVDD PIN from PCB according wiring diagram Connect MQB board to VVDI PROG for reading. Save the immo dat...

Pogledaj dalje »