Prijavi se

Zapamti me

xhorse dolphin xp005

Xhorse Dolphin XP005 Axis Motor Not Working Solution

Problem: I got a problem with xhorse dolphin xp005 key cutting machine, axis motor is not working and app says error code 56. Any clue?         Solution: Solution 1: Clean everything with solvent and don’t update it put an older version so the error is erased and don’t put the last update   Solution 2: vacuum, clean from shavings. lift it air flip. shake. restart BRUSH. Do...

Pogledaj dalje »
Xhorse Key Cutting Machine Clamp Function List (M1-M5)

Xhorse Key Cutting Machine Clamp Function List (M1-M5)

Xhorse key cutting machine can duplicate and cut different key blades by changing clamps. Clamp M1 & M2 are included in standard package. You can enlarge blade coverage by optional purchases of Clamp M3, M4 and M5 coming soon. Let’s see what keys they can deal with: Clamp Name Price Machine Working With Supported Type Key Image Clamp M1 (Included in package) 154$ Dolphin XP005 Condor XC-Mini P...

Pogledaj dalje »

Xhorse Dolphin XP-005 “Error: 56” “error code: 6” Solutions

Question: Xhorse Dolphin XP005 prompts “Error: 56” and “error code: 6”. Have shot and sent the video of electrical conductivity measurement, please check. Solutions: Check the steps as the prompts. (height level adjustment, clamp calibration etc.) Do the electrical conductivity measurement. If the cutter and the probe don’t conduct, disassemble the machine and test abnormal conductivity of the cut...

Pogledaj dalje »

Xhorse Dolphin XP005 Probe and Cutter Conductivity Test Guide

Here is the tip on detecting abnormal conductivity of xhorse dolphin xp005 key cutting machine probe and milling cutter.     Step 1: Disassemble the back cover, and be careful of the wiring harness of the cover when disassembling         Step 2: Remove the back cover, you can see these things, take off the wire harness, and remove the Phillips screws (see Figure 1). T...

Pogledaj dalje »

Xhorse Dolphin XP005 “error 56, error code: 6” Solution

Problem I have successfully cut 3 keys via Xhorse Dolphin XP005 + VVDI Key Tool Max until the 4th key, it prompted “Error:56. The cutter is short-circuited, please check the cutter conductivity. Please take photo and send to technical support.”   The error still exits even if I use other devices to control Dolphin XP005, it occasionally occurs cutter detected error code: 6 as below “Please do...

Pogledaj dalje »

Xhorse Key Tool Plus Controls Dolphin XP005 to Cut NE66 Key

Just got a new device Xhorse VVDI Key Tool Plus recently, so today I wanna test it to control Dolphin XP005 Key Cutting Machine to cut a Volvo NE66 key.   Firstly you should get the bitting key code, it’s H05933, 3312-2134.     After connecting Key Tool Plus with Dolphin XP005, press Cutting key >> All key lost >> Volvo >> Input key code, query >> NE66, 4-4 b...

Pogledaj dalje »

Xhorse Dolphin XP-005 Cut Acura Hon66 Laser Key via M2 Clamp

Today I’m gonna show how to use Xhorse Dolphin XP005 + VVDI Key Tool Max to copy a HON66 laser key.   Prepare a Honda original key & a new key blank. Connect Key Tool Max with Dolphin XP005 via Bluetooth to smart control.   Vehicle database >> Acura >> MDX >> HON66 >> OK Install M2 clamp, and fix the original key on it as prompts.       Decode key &g...

Pogledaj dalje »