Prijavi se

Zapamti me

xhorse key tool max

Xhorse Mini Prog + VVDI Key Tool Max Program 2013 VW CC 95320

How to use Xhorse Mini Prog + VVDI Key Tool Max to program a dealer key M95320 for 2013 Volkswagen Passat CC? Today I’ll demonstrate it on bench.   Read & Save EEPROM Remove the outer shell to take out chip. Hold and push Mini Prog straight down on the M95320 chip. Press on Key Tool Max meanwhile,           EEPROM and FLASH >> ST >> M95XXX >> M95...

Pogledaj dalje »

How to Read Renault BCM 95040 with Xhorse Mini Prog and Key Tool Max?

How to use Xhorse VVDI Mini Prog & Key Tool Max to read Renault Duster BCM IC95040 eeprom? As below I’ll show step by step.   Tools A Renault Duster BCM IC95040 module A VVDI Mini Prog A VVDI Key Tool Max       Connect Mini Prog with Key Tool Max via Bluetooth firstly.   Remove BCM IC95040 outer shell, hold & push Mini Prog down straight on chip to read;   &nb...

Pogledaj dalje »

Program CHRYSLER 300 Proximity by Xhorse Key Tool Max

Success report:  program 2011-2017 CHRYSLER 300 Xhorse proximity no issue with xhorse vvdi key tool max and mini obd tool.   Main steps: 1. Generate smart key 2. Read password 3. Program smart key     Procedure: In Key Tool Max app, select Vehicle Remote->Chrysler->Chrysler KeylessGo ID46 433MHz proximity       Read programming instruction and press Generate rem...

Pogledaj dalje »

Program 2015 Toyota RAV4 H Chip All Keys Lost by Xhorse Key Tool Max and Mini OBD

Xhorse vvdi 8A adapter kit works perfectly on Toyota RAV4 2015 (with H chip, none-smart key) when all keys lost.  This procedure works with other Toyota 8A chip as well, i,e  a Toyota Hilux 2018.  The vvdi 8A cable kit works until 2019 in normal key. You need to modify the connector that goes to the coil plug because some are different. Device required: Xhorse vvdi key tool max + mini obd tool + 8...

Pogledaj dalje »

How to Add BMW CAS3 Key by Xhorse Key Tool Max and Mini Prog?

Purpose Using Xhorse VVDI Key Tool Max & Mini Prog to program a new key for BMW CAS3+ on bench.   Tools BMW CAS3/CAS3+, dashboard, ignition modules BMW CAS3/CAS3+ Solder-free Adapters VVDI Key Tool Max Xhorse Mini Prog An old BMW key & a new key           Procedure   Read EEPROM Connect Key Tool Max with Mini Prog via Bluetooth. Go to Mini Prog main page, pres...

Pogledaj dalje »

Program Toyota G Chip ID72 Key by VVDI Mini Prog + Key Tool Max

How to use Xhorse VVDI Mini Prog + VVDI Key Tool Max to program Toyota a G chip ID72 key by reading EEPROM? As below is a demonstration step by step.   Tools Toyota ECU immobilizer model VVDI Mini Prog VVDI Key Tool Max   Take out the EEPROM chip from outer shell, clean the chip pin for ready. Power on Mini Prog, connect it with Key Tool Max.         Procedure Read EE...

Pogledaj dalje »

VVDI Key Tool Max + Mini OBD Tool Add Toyota Sienna 2018 Key

Today I’m gonna show how to add a key for Toyota Sienna 2018 using with Xhorse VVDI Key Tool Max + Mini OBD Tool.   Prepare a working key & a blank new key. Insert Mini OBD Tool into OBD2 port. Connect with Key Tool Max, let’s start:         Immo programming >> Toyota >> Select by type >> Smart key system >> Type 3 (8A smart card) >> Start...

Pogledaj dalje »