Prijavi se

Zapamti me

Xhorse key tool plus

VVDI Key Tool Plus Generate 2015 Nissan Rogue Transponder

This post is showing how to use Xhorse VVDI Key Tool Plus Pad to clone and generate a VVDI Super Chip key for 2015 Nissan Rogue.   Tools required: Xhorse VVDI Key Tool Plus XT27A66 Super Chip Original key New blank key Xhorse Condor XC-009 key cutting machine       Procedure Clone Key Put the original key into VVDI Key Tool Plus coil, press Transponder clone >> Read trans...

Pogledaj dalje »

Program Porsche Cayenne All Keys Lost by Xhorse VVDI Key Tool Plus + BCM Adapter

Use Xhorse VVDI Key Tool Plus + Solder Free Adapters can program 2011 Porsche Cayenne all keys lost quickly without soldering.   Since customer has lost all keys, I’ll use the BCM adapter XDNP17 to connect with VVDI Key Tool Plus for data reading.           After 5M48H D-Flash backup successfully in Prog. Let’s get start to program a key.   Immo programming >&...

Pogledaj dalje »

Xhorse VVDI Key Tool Plus Program 2021 Ford Bronco AKL

Xhorse VVDI Key Tool Plus Pad is able to program 2021 Ford Bronco Sport all keys lost via OBD successfully. Following I’m gonna try to add these 2 keys for this vehicle.     Backup P-Flash & D-Flash Connect VVDI Key Tool Plus with OBD, press Immo programming >> North America >> Ford >> China market >> Select by model >> Escape >> Smart key system &...

Pogledaj dalje »

How to Unlock BMW Remote with Xhorse VVDI Key Tool Plus via EEPROM?

Xhorse vvdi key tool plus has the option to unlock BMW remote key by eeprom no open remote nor soldering.  Take a CAS2 remote key example here. Read CAS3 eeprom and save Go to Immo Programming – BMW – Select from system – CAS2 system – Unlock Key – Start programming – Use EEPROM to unlock key           Upload eeprom file you saved Put locked key into xhorse key tool plus i...

Pogledaj dalje »

Xhorse VVDI Key Tool Plus Unlock Chrysler PCF7953 Smart Key

Today we are going to unlock another smart remote key for Chrysler/Jeep/Dodge with xhorse vvdi key tool plus. FCC ID M3N-40821302 PCF7953   In key tool plus, we will read transponder and show you that this is a used key.         Select Special function- Remote Renew – Chrysler – M3M Hitag2 It shows you if there is an available xhorse renew adapter for it We have two option...

Pogledaj dalje »

Xhorse Key Tool Plus Read BMW DME ISN without Soldering

Xhorse XDNP30 BOSH ECU Adapter and Cables can work with VVDI Key Tool Plus or Mini Prog to read BMW ECU ISN without soldering, support N55, N20, B38, B48 and more than 80% F series type.   This is a tutorial to demonstrate how XDNP30 BOSH ECU Adapter works with Key Tool Plus.   Procedure Step1. Connect XDNP30 Adapter with Adapter Cable & ECU, plug the other side of cable into Key Tool Plu...

Pogledaj dalje »