Prijavi se

Zapamti me

xprog

Free Download XProg 5.84 Software to read EEPROM

Problem: My Xprog V5.84 fail to read serial eeprom, don’t give eeprom options. Error “For information, please refer to xprog-m users manual” Solution from obdii365.com engineer: Xprog v5.84 default software CD does not have eeprom capabilities which is different from previous version V5.74/5.60/5.55 etc But the new v5.84 software has modified the software to enable eeprom reading. Free Download Xp...

Pogledaj dalje »

Citroen c elysee 2015 Odometer Correction with Xprog

How to:  correct mileage on Citroen c elysee 2015 with xprog m box ecu programmer (here using version v5.55). Original odometer: 186,854 KM   Wiring connection to xprog     Mileage after correction: 71,086 KM   (Click to enlarge) Video guide: https://vimeo.com/302783757

Pogledaj dalje »

Xprog M V5.84 Software Free Download and Install

Here you can download V5.84 software for Xprog M box clone. Software version: V5.84, Firmware:V4.4 With USB Dongle, No need to activate Firmware 4.4: Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9Language: English XPROG-M V5.84 Authorizations: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorol...

Pogledaj dalje »

How to Repair or Unlock ATMEGA64 on Xprog

Here’s the customer solution to help users solve the problem xprog atmega64 locked and can not read or program chip issue. This is done off board with qfp64 breakout board should be able to  program onboard xprog also though. Disclaimer:  Many thanks dil6222 from cartechnology.co.uk forum. You are at your risk. Easy fix all you need is: 1. UPA USB PROGRAMMER 2. USBASP WITH SLOW CLOCK JUMPER ON EXT...

Pogledaj dalje »

Xprog read BMW Airbag to remove 240 Internal Error

On the example of the control unit Temic 6577-6900727, he himself MRSZ3 V. 2.5-V. 3.0.  I will show you how to remove 240 “Internal error” error. This airbag has been installed in BMW e39, е38 and е46. For this you need a xprog box programmer that will be able to read the data from this ECU. We just need to record new memory without errors in the Motorola MC68HC12b32 element. See the c...

Pogledaj dalje »

How to enable BMW E46 tripple blinker with Xprog

Here’s the DIY guide for those whom want to get tripple blinker on their BMW E46. DIY:  1) you need LSZ module with =>SW3.6 on sticker 2) xprog v5.55 v5.60 or above with mc9s12 bdm adapter 3) sticked dump of ci37 (eeprom virgined, need to be coded after installing ecu to car) wires color legend (follow xprog box connection manual for mc9s12d64): blue – reset red – VCC green &#...

Pogledaj dalje »

Benz Sprinter 2010 EZS Pinouts to Xprog and R270

Purpose:  Do odometer correction on 2010 Sprinter Van. I need the soldering points for the ezs/eis.I can’t actually see the mask but after extensive reading every points to them having the 0L01Y mask. Which programmer will work? Solution: R260 original ok clone rosfar,ok xprog clone ok R270 ok Use xprog the pinouts for xprog is what posted below. i always do this with xprog and never had a p...

Pogledaj dalje »