Prijavi se

Zapamti me

Auro OtoSys

How to Read EEPROM FEM M95128 by Autel IM608?

Test report: Autel MaxiIM IM608 is confirmed to read out EEPROM M95128 from the BMW FEM system. Connection: All connection should be good before data reading Menu: In Autel IM608 software, pls go to IMMOBILIZER then accept agreement Select BMW – SYSTEM SELECTION – IMMOBILIZER – FEM/BDC IMMOBILIZER       Then select EEPROM operation – Diagram   Diagram in Autel Im608: FEM M95128...

Pogledaj dalje »

How to Read ST95040 Eeprom with Autel XP400 and IM600?

Back in October I received my free upgrade for my Autel IM600 *XP400* to replace the *UP400* Link to XP400: http://www.obdii365.com/wholesale/xp400-programmer-for-autel-maxiim-im608.html I made a post that shows the New and improved XP400 reading a ST95040 Eeprom “In-circuit” with success, HOWEVER I wanted to show another video of the XP400 messing up a Eeprom *95080*. I was able to re-write the d...

Pogledaj dalje »

How to change Hyundai Verna 24C16 Mileage without Soldering

Yanhua Mini ACDP is not only a key programmer but also an eeprom programmer based on mobile system. Here’s the demo guide to read eeprom and change odometer on a Hyundai Verna.   No need laptop No need to remove chip No soldering (Note: Only Yanhua mini acdp host default package is required in this case. Don’t need other authorization. )   Remove instrument cluster Hyundai Verna  EEPROM ...

Pogledaj dalje »

How to Read EEPROM ST95040 using Auro OtoSys IM600 and UP400

Auro OtoSys IM600 is a diagnostic, key programming and ecu coding 3-in-1 tools. Here’s a real test report on reading EEPROM ST95040 together UP400 eeprom adapter. Remove ecu Connect IM600 with UP400 adapter and computer Select Programming->Chip Read & Write->EEPROM->ST->M95XXXX->M95040->View Diagram             OtoSys IM600 will show you id...

Pogledaj dalje »

Read Audi 2010 MED 17.5 ECU Data with Auro OtoSys IM600

New test report from Spanish technician: Reading of CS, MAC code and pin of ECU Audi 2010 MED17. 5 with Auro Otosys im600 tablet diagnostic and programming tool via direct method. Remove ECU from vehicle Connect IM600 and OtoFlash J2534 reprogramming adapter Select IMMO->Audi->Engine->MED17->Read IMMO data using direct method Jumper wire operation needs to be performed on the ECU Press...

Pogledaj dalje »

BMW FEM BDC Renew using Auro OtoSys IM600

This manual introduces how to conduct BMW FEM/BDC ECU Renew on Auro OtoSys IM100/IM600 key programmer.     Two options are available when accessing FEM/BDC Renew:  Copy Data Update : When the immobilizer information of the vehicle can be read from the original FEM/BDC module, perform this function to read the information and write it into the replacing FEM/BDC module.  Calculate Data U...

Pogledaj dalje »