If you had error code 5 when cutting key with Xhorse Dolphin XP005L key cutting machine (error images shown below), here is the possible solution. Solution: Remove those 3 screws set from probe base. Check the small wire and clean up iron filings.
Pogledaj dalje »How to Check Xhorse Dolphin XP005/XP005L Battery Information? In Xhorse App, go to Device Information->Key Cutting-> Power->Check battery information Need to connect dolphin with Xhorse App to read battery information. If it is XP005L, you can check battery information on the App or in the device (go to Battery information). If the battery cannot charge or has ...
Pogledaj dalje »Problem: One of our customers failed to calibrate the Xhorse Dolphin XP005L key cutting machine. The dolphin ii reported error code 6 during the calibration process. Possible solution: Open the back cover and adjust the X-axis sensor or baffle. User feedback: He checked and found this part is broken. Final solution: Need to replace the X-axis sensor. Better replace the sensor ...
Pogledaj dalje »We have already shown how to remove the shell and test the battery voltage for Xhorse Dolphin XP005/XP005L key cutting machine. Some people don’t know how to measure voltage. Here we will show how to measure battery voltage in detail. It’s best to take photos to ensure that the gear and pins are correct. Select DC power supply gear, please measure the voltage of these two pins of the battery on t...
Pogledaj dalje »Question: How do you duplicate emergency key for 2021 Toyota Highlander TOY51 SINGLE SIDE with the newer version of Xhorse Dolphin XP005 with M5 clamp? Probe does not detect key, clamp seems too low. Here is the clue: You cut it on the wrong side. You need to use the correct profile use the TOY40 one sided blade for emergency blade and it will work. You cut the key on side A, not side B, th...
Pogledaj dalje »One of our customers reported that his Xhorse Dolphin XP008 manual key cutting machine sounds weird when duplicating key. Here is the possible solution from Xhorse engineer. 1.Unscrew these two screws and take off the belt. 2. Unscrew 5 screws on the shell 3. Unscrew the top screw in this hole. 4. Unscrew the cutter head and you can take out the bearing 5. You can apply some g...
Pogledaj dalje »Entry question: Looking to buy my first horse key cutting machine mainly for auto and household key duplication. Should I go for the Dolphin XP005L or the Condor II? Any recommendations? They have the same car key database. As for household key cutting, xhorse dolphin I and dolphin II will not cut house key by bitting. You need to write the bitting yourself. Dolphin will duplicate only. Dol...
Pogledaj dalje »