Prijavi se

Zapamti me

Condor XC-Mini

Xhorse Condor II Error Code 57 Short Circuit Solution

Problem Xhorse Condor II key cutting machine had error code 57. The probe is short-circuited.     Solution Just as it indicated, the probe is short-circuited. Follow guides below to disassemble machine Xhorse Condor II Short Circuit Test Guide Then check the probe catheter.       Check if it is broken and report result to www.vvdishop.com

Pogledaj dalje »

Xhorse Dolphin XP005 Cut Can-Am Spyder ZD24R Key

Since I’ve used the ZD24R LISHI to pick and decode a Can-Am Spyder 3-wheel motocycle ignition, so next I’m going to cut the key with Xhorse Dolphin XP005 by bitting. In case to wreck a pretty expensive key blank, I would try X270 TMC1 key for a test at first. The bitting codes decoded by LISHI is 232234.       Cut by bitting >> Silca – ZD24R >> ZD24R, 6 bitting, 770*2350...

Pogledaj dalje »

Xhorse Condor Dolphin Fix VA2EH2 bug

Xhorse Condor Mini Plus/Condor II/Dolphin XP005/XP005L released a new database update on Nov. 7th, 2023.   Serial number and firmware version:     APP version: Android 4.1.5, iOS 4.1.5   Add key data Kawasaki KLR Xiaopeng P7 Luyuan Electric Vehicle Automobile Weizhi V2 Kia K9 Yuejin S80 Geely Geometry E Isuzu Competitor Hyundai Tucson Hyundai Santa Fe Hyundai Xcient Ruilan Mapl...

Pogledaj dalje »

Xhorse Dolphin XP005 Clamp Calibration Error 35 Solution

Problem: The Xhorse Dolphin XP005 Key Cutting Machine can’t work normally, it gave a clamp calibration “Error: 35” message.   “Error: The end tip of the probe is beyond the cutter. Please confirm that the clamp is correct; Do again of height level adjustment.”   What’s the matter? Please help.         Solution Pull the probe down a little bit; Follow the prompt to do ...

Pogledaj dalje »

Xhorse Dolphin XP005 New Update Fix Renault VA2 Bugs

Xhorse Dolphin XP005 and XP005L released new database version V127 on Oct. 18th. 2023. There is an update for that blade fixed. This version fixed Renault VA2EH2 key cutting issue.           Feedback: I had the issue last week with same blade. After updating it to latest software it was all fixed.     FYI: You can use universal key duplication option if you have ...

Pogledaj dalje »

Xhorse Dolphin XP005 Firmware 1.7.4 Fixed VA6 Cutting Issue

Some users reported that Xhorse Dolphin XP005/XP005L had bugs when cutting VA2/VA6 key blanks in the last update. The problem was solved by the last update. V1.7.4 came out and fix the va6 issue. Update the firmware to 1.7.4 or Dolphin machine and update also the Xhorse app.   Feedback: Just cut a VA6 I decoded the key Q-H then cut as normal. so I tried again with the same key but this time I...

Pogledaj dalje »

How to Replace Xhorse Dolphin XP005L WiFi Module?

Problem: I connect my Xhorse Dolphin XP005L to a phone via Bluetooth, it keeps disconnecting by itself. after that i connect back then it immediately disconnects. Firmware and database are up to date. I also use the machine with key tool plus. he has disconnected with it a total of 1 time so far. it is much rarer there. Any solution?         Solution: Update firmware and databa...

Pogledaj dalje »