Prijavi se

Zapamti me

ECU tuning software

How to Clone Chrysler GPEC2 ECU with OBDSTAR DC706 MP001

Here are the instructions to clone Chrysler/Jeep/Dodge Continental GPEC2 ECM with OBDSTAR DC706 & MP001 programmer.   You will need OBDSTAR DC706 ECU TCU cloning tool MP001 programmer ECU Jumper cables  (or bundle set with DC706, MP001 and jumper cables) GPEC2 ECM Extra power supply.       Procedure: In DC706 select ECU Flasher->latest ECM software version. Search Jeep G...

Pogledaj dalje »

How to Reset OBDSTAR DC706 to Factory Setting?

If OBDSTAR DC706 does not come in anymore after software update, only displays the error ‘the DiagProgram Application has Stopped’. How to fix it?     Solution: In this case you will need a firmware reflashing (reset to factory setting).   Flash file is not open to everyone.  Contact our customer service by providing your serial number. Download the Firmware Flash file and operation...

Pogledaj dalje »

Top 6 CAN FD & DoIP J2534 Devices in 2024

 Entry question: I looking for a j2534 device that will work with GM, Porsche, Volvo, Ford/Mazda, Nissan, Honda, Jeep and more, and support new CAN FD and DoIP protocols. Any tool recommended?     We list top universal J2534 passthru devices which support CAN FD and DoIP (from cheap to expensive).     1.Autel MaxiVCI V200 Price: $159 The VCI200 has a reduced footprint, includes...

Pogledaj dalje »

OBDSTAR DC706 Adds MG1CS001 SID305 MEDG17.9.8 ECUs

OBDSTAR DC706 and X300 Classic G3 update new ECU flasher software V30.70 on April 30th, 2024. *G3 need to activate ECU flasher license to have these updates. Add Read/Write INT flash, ReadA/Vrite I NT eeprom functions for below models: • ALFA ROMEO BOSCH EDC17C69 TC1793 • ALFA ROMEO BOSCH MED17.3.3 TC1793 • AUDI BOSCH MG1CS001 SPC5777 • CITROEN BOSCH MEV17.4.2 TC1767 • DAEWOO SIEMENS/KEMSCO D3 29F...

Pogledaj dalje »

Thinkdiag2 Unboxing, Download, Review and Comparison

Thinkdiag 2 is an advanced Bluetooth OBD2 scanner with every function needed to diagnose car problems. It also does advanced service functions and ecu coding, and it does it for a wide car brand range. Here comes a detailed review of the thinkdiag2.   Unboxing: The thinkdiag2 obd2 scanner is well made and comes with a nice sturdy case. The cable and scanner are separate, that way if the cable...

Pogledaj dalje »

Free Download Vediamo 5 with Slave File for J2534

Some users follow the forum guide to set up the VXDIAG VCX SE Benz with Vediamo 5.1. Vediamo will recognize the VXDIAG but when connecting to ECU module (i.e MED40), they will get the error that the connection with the ECU cannot be established.       Here is the clue. Vediamo 5.01.01 need a special fix file (slave file) to configure as J2534.   Here we share the Vediamo 5.01.0...

Pogledaj dalje »

OBDSTAR DC706 Clone Fiat 8GMK ECU on Bench

OBDSTAR DC706 software works perfectly on European Fiat 8GMK, 8GMW, 8GMF ect ECUs, tested many times. Our customer did a Fiat 500 8GMK cloning the other week witout problem at all. You can read, write and clone those ECUs on bench using P004/MP001. Pinout Fiat 8GMK ECU Select Fiat Magneti Marelli 8GMK CAN SPC564A80B4+ 95640 Connect Read EXT EEPROM ok Read INT flash ok Write EXT eeprom ok Write INT...

Pogledaj dalje »