Prijavi se

Zapamti me

Nekategorisano

How to Read and Write Hyundai SIM2K240 ECU by Foxflash

Problem: Foxflash tool wrote Hyundai Sim2k240 and corrected the checksum of the flash well, in the eeprom wrote complete but says up cheksum error, will I have problems with that?         Solution: That’s mean this chips need you do chekcsum, tool won’t help you do for this one. Don’t modify eeprom. Normally we don’t modify eeporm. if don’t ori , maybe car won’t start, you need...

Pogledaj dalje »

Autel IM608 Update 2023 Chrysler Dodge Jeep Proximity

Autel MaxiIM IM508/IM608 released Dodge/Chrysler/Jeep read password / key learning update today. 1. Adds functions including Read Immobilizer Password, and Key Learning for the following smart key-equipped models of 2022-2023: Challenger, Charger, Ram, Ram Truck, Ram 1500 DT, Ram 2500/3500, and Ram 4500/5500. 2. Adds IMMO functions for the following models in South America: ProMaster Van (2013-202...

Pogledaj dalje »

Top 4 Tools to Bypass GM 24-digit Security code

How to bypass GM 24-digit body module  BCM security verification code for 2021- new GM CAN FD models? Autel CANNOT do the new GM  immo system. the ONLY aftermarket tools that can do it are obdstar,  xtool and autopropad.   Obdii365.com here provides top 4 tools to bypass new GM pin code.   1). Xtool tools The $500 or less Xtool D7, D8, D9, D9 Pro can do CanFD, even 2023. (Stand alone the...

Pogledaj dalje »

Openport Failed to Connect DTS Monaco 9.02 Solution

 Problem: I managed to resolve an annoying communication error (99.58642.0) that I have been experiencing for a while when trying to scan certain vehicle models using XENTRY Pass Thru 23.6.3 with my Tactrix Openport 2.0 and GODIAG GD101 PassThru devices. E.g. my A45 AMG W176 would always throw Communication Error 99.58642.0 when trying to scan it. If you have DTS9 installed on the same machine as ...

Pogledaj dalje »

Launch X-prog3 vs X-prog3 PC Software

What’s the difference between Launch X-Prog3 programmer and the X-prog3 with PC adapter (X-prog3 PC version)?       The major difference will be: 1. X-prog3 PC version VW Audi Porsche ECU Cloning function is in the Data processing section 2. The PC adapter connection is more convenient 3. Data reading and writing speed is faster and more stable (3x times faster than Android tablet) ...

Pogledaj dalje »

Read and Write EDC16 ECUs with CG FC200

CG FC200 Programmer released a new mpc5xx adapter for bench edc16 ECUs (EDC16CP31, EDC16CP35, EDC16C2, EDC16C8 etc).  With this adapter you can read and write edc16 in bench mode. Not all edc16 ECUs are available yet, but it’s a pretty good start. FC200 released frequent software updates. This has a fairly cheap purchase price!       How to Read EDC16 with CG FC200 on Bench? Example...

Pogledaj dalje »

How to Install Xhorse MVCI Pro with Toyota Techstream?

Xhorse MVCI Pro J2534 cable is tested working fine with Toyota Techstream V18.00.008 software.   MVCI Pro does not have CD software. Contact www.vvdishop.com customer service to download Techstream v18 and patch.   How to use Xhorse MVCI Pro with Toyota Techstream? Download Toyota Techstream V18.00.008   Install Techstream_Setup Accept license agreement         I...

Pogledaj dalje »