Prijavi se

Zapamti me


Starlite Optical Cable Connector Boxe Precision Design

Metal stamping is a complex process that can include many metal forming processes – punching, punching, bending and perforating. Blanking: This process is about cutting rough outlines or product shapes. This phase is about minimizing and avoiding Burr, which increases your part cost and extends the lead time. This step is used to determine hole diameter, geometry/taper, edge to hole spacing ...

Pogledaj dalje »

DIN 603 Bolt Hot-dip Galvanizing Chemical Treatment

First, hot-dip galvanized DIN 603 bolt features The hot-dip galvanized DIN 603 bolt is obtained by immersing the rust-removed steel in a zinc solution melted at about 500 ° C to adhere the zinc layer to the surface of the bolt to prevent corrosion. The galvanized layer is relatively strong. The galvanized layer is relatively strong. Cold galvanizing, relatively no heating, little galvanizing, galv...

Pogledaj dalje »

Reasons For Poor Quality Of DIN 603 Bolt Products

DIN 603 bolt raw materials and related technologies are lagging behind. An important reason for the poor quality of DIN 603 bolt products is the poor quality of raw materials and the backwardness of related technologies. For example, cold heading steel wire cold heading steel is mainly used to manufacture fasteners such as bolts, nuts, rivets and bolts. Its chemical composition and metallographic ...

Pogledaj dalje »

DIN 603 Bolt Surface Treatment

Electroplating of DIN 603bolts Electroplating of DIN 603 bolts means that the parts of the fastener that need to be electroplated are immersed in a specific aqueous solution, which contains some deposited metal compounds, so that after passing through the aqueous solution by electric current, the metal substances in the solution are deposited and adhered to The immersed portion of the fastener. Pl...

Pogledaj dalje »

DIN 603 Products Choose Yihui

Haiyan Yihui Hardware Technology Co., Ltd. DIN 603 complies with German national standards. We have professional, rigorous manufacturing specifications, thin and thick lines, attribute grades 8.8 and 10.9, as well as regular and zinc transparent tri-valent finishes. At the same time, we will also provide a variety of value-added services, including custom plating, drilling and slotting rework, the...

Pogledaj dalje »

Yihui DIN 603 Bolt Is A Good Choice

The corrosion resistance of fasteners is very important. Sometimes fasteners require a special coating. Zinc is currently the most commonly used coating. It provides reasonable corrosion resistance at a reasonable price. Hot dip galvanized coatings provide a greater degree of resistance and are typically used for exposure to high humidity and/or salt, such as in coastal areas. Due to the thickness...

Pogledaj dalje »