The OBDSTAR X300 Classic G3 with ECU Advanced software V30.00 now support advanced battery programming for 2018-2023 Porsche Cayenne. Step-by-step guide: Connect X300 Classic G3 and Porsche Cayenne via OBD cable Navigate to: ECU Advanced-> PORSCHE-> PORSCHE V30.00-> BATTERY-> CAYENNE 2018-2023 Click [Guide] to check the background and menu description. Available functions: 1.ECU Info. ...
Pogledaj dalje »OBDSTAR X300 Classic G3 paired with the RH850/V850 Adapter Kit offers advanced key programming capabilities (new key adding+ all keys lost) for Volkswagen MQB48-5A, Ford/Lincoln 2021-, Nissan, Renault, and FCA vehicles (upcoming upgrade). How to program key? Check the operation guide below. Example: 2018 Volkswagen Tiguan (MQB48-5A) – All Keys Lost (AKL) Key Programming by OBDSTAR G3 ...
Pogledaj dalje »OBDSTAR releases the new upgrade for TOYOTA-30 Cable on April 24th, 2025. Now it can support ID4A, ID8A-BA, ID8A-B9 proximity key programming (All keys lost, no need Pincode), 2019 S6 I3XY and 2021 R7F701401 dashboard mileage calibration new functions. No need to pierce, hook, or plug/unplug harness during operation. No risk of damaging communication cables. Support Functions: ID4A proximity key p...
Pogledaj dalje »Here is a guide on how to reset the VIN on a GM HMI 2.0/2.5 module by OBDSTAR X300 Classic G3 Tool. Four Steps To Teset VIN: 1. Enter ECU Advanced Mode Connect the Key Master G3 to the vehicle's OBD port, on the main screen of the device, go to ECU Advanced>> GM/OPEL>> GM/OPEL V30.04>> OPEL>> HMI2.0/2.5. Then tap on “Guide” to carefully read the connecti...
Pogledaj dalje »
OBDSTAR released a new RH850/V850 Adapter kit to work with OBDSTAR X300 Classic G3 key programmer for Volkswagen MQB, Ford, Nissan, Renault, and FCA vehicles key programming, IMMO data decryption, BCM reading and airbag reset. OBDSTAR RH850/V850 Adapter Full Kit comes with the following goods (only US$69): 1pc x C4-06 Adapter 1pc x W010 Cable 1pc x W010A Adapter 1pc x C4-06-C01 Adapter 1pc ...
Pogledaj dalje »
How to replace the motherboard of OBDSTAR X300 Classic G3 key programmer for repair? Check the step-by-step guide below Disassembly Step 1: a.Remove the rubber case. b.Use a screwdriver to loosen and remove the hex socket screws. Step 2: Open the back cover and press down on the battery connector clip with your hand, then pull out the battery connector. Step 3: Remove the antenna marked by the a...
Pogledaj dalje »