Prijavi se

Zapamti me

VVDI Prog

VVDI Prog V4.7.7 adds M35128 M35160WT EEPROM

Xhorse VVDI Prog programmer released new update adding M35128, M35160WT and other options. VVDI Prog latest software version V4.7.7 update ————————————- v4.7.7 (2018-11-28) * This version DON’t need update firmware + Add VVDI PROG USER MUNUAL 4.7.7 version in Doc folder + Add M35128(ADAPTER) M35160WT(ADAPTER) options in <1-EEPROM&FLASH>-> (Need M35160WT ADAPTER) + Add MB89F538, MB89F5...

Pogledaj dalje »

Program Renault Clio 1997 C46CM6 Key via EEPROM

All keys lost on renault clio from 1997 , got pin code from immo box need to eeprom ST C46CM6 using xhorse vvdi prog programmer. Picture attached:       Solder ST C46CM6 chip to vvdiprog EEPROM adapter Save eeprom data Calculate pin code and program transponder with Renault obd programmer  http://www.vvdishop.com http://blog.vvdishop.com/vvdi-prog-read-renault-clio-1997-eeprom-st-c4...

Pogledaj dalje »

Mercedes Benz Common ECU Dash ISM Pinouts to VVDI MB

Q: I want read/write eeprom from vdo cluster w211 from 2002 at table with vvdi mb bga tool. can’t do it in car. have access for odometer change only. need pin out if possible. A: Here’s the common pinouts to Mercedes-Benz. 1.Dashboards W211, W219, W203, W209 Dashboard W212, W218, W204, X204 Dashboard W221, W216 Dashboard W245, W169 Dashboard SMART 451 Dashboard 2. Engine Control Units ME9.7 MEG SM...

Pogledaj dalje »

VVDI Prog Pinout to BSI Marelli MC68HC912DG128

Here’s the Xhorse VVDI Prog programmer pinout to bsi magnet marelli. I have successfully read bsi magnet marelli whit vvdi prog,mcu is MC68HC912DG128 unsecured Mask:5H55W , using this wiring diagram , hope this will be useful for somebody used wires are VCC -red GND black , reset- yellow and BKGD – purple       Credit to iozo from DK forum. http://www.vvdishop.com http://blog.vvdish...

Pogledaj dalje »

Read Range Rover CEM 2006 with Xhorse VVDI Prog

Question before entering: Anyone read Range Rover CEM 2006 with the Xhorse Vvdi prog?? I been trying to tread but keep getting can not connect to chip! Any ideas? Xhorse expert solution: Yes. CEM should be 2006-2009. I’ve done it 3 times by Vvdi prog and vvdi2. vvdiprog reads no problem and vvdi2 can do a key for range rover 2006-2009. It works 100%. resistor to put while reading: It is a regular ...

Pogledaj dalje »

VVDI Prog Read Astra H CIM Dump and Calculate PIN Code

How to get 4-digit PIN code for Opel/Vauxhall Astra H from CIM EEPROM 95160 dump using Xhorse VVDI Prog programmer. Remove and disassemble CIM module Desolder chip 95160 with a hot gun Solder it into vvdi prog SOP16 adapter Connect VVDI-Prog with computer Open VVDIProg software, select EEPROM->ST->M95160 Read eeprom and save it. Same file: original.bin Download WinHEX editor and open it Uplo...

Pogledaj dalje »

How to Read BMW Land Rover EWS3D with VVDI Prog and EWS3 adapter

BMW EWS3D module is different from regular EWS3 module.  Ews3D can be found in bmw Z3 and some older Land Rovers. BMW EWS III D EWS Ill D is installed on E36/7 beginning of production 99 Model Year. The system does not have a K-Bus input. Purpose of the System The purpose of the EWS 3 D system is to provide the highest level of drive away protection available to vehicles without a K-Bus. The input...

Pogledaj dalje »