Prijavi se

Zapamti me

VVDI2

How to read Audi EZS Kessy EEPROM J518 by VVDI2

Here is the instruction showing the capabilities of the Xhorse VVDI2 VAG key programmer: Reading EEPROM with EZS Audi A6 / Q7 How to read eeprom from EZS AUDI by OBD with VVDI2: Select Key Learn->4th immobilizer system- Audi-> A6L/Q7/Allroad A6L/Q7/Allroad EZS-Kessy (J518) 4th immobilizer system Select Auodetect from engine (ECU) reading data, please wait Reading data success Read and save E...

Pogledaj dalje »

VVDI2 Adds Key for Passat 2013 NEC 24C64 Dash by OBD

Here is the guide to use Xhorse VVDI2 VAG key programmer to add key for Passat 2013 with VDO NEC+24C64 dashboard by OBD.   VVDI2 adds Passat 2013 Key Guide: Go to VVDI2 software-> select VW car brand Select Key Learn->4th Immobilizer system-VW/Skoda/Seat->Auto detect type VVDI2 read VIN ECU and dash type: NEC+24C64 Click on Diagnosis Click on Read EEPROM/FLASH Select Read eeprom, cli...

Pogledaj dalje »

VVDI2 Full Car List Key Programming by OBD

Questions before starting: Now Xhorse VVDI2 VAGid48 is not ready. so i can’t add key passat b6 or any other vag key with id48 chip? It programs passat b6 b7 or other id48 cars by obd?     Solution: Not all possible over obd. Some need read out bcm2, some of them need read out with programmer, like vvdi prog or other.   Some newer Passat with ECU EDC17, if you have condor key cutting...

Pogledaj dalje »

How to Program Fiat Bravo Key by usinf VVDI2 Full

An old Fiat Bravo 2008 have lost all keys.  Most OBD key programmers can only program its remote, but cannot program chip key. Can only write start key. Step 1: Remove BSI Dissemble the BSI under the dashboard which is made by Magneti Marelli company. Step 2: Write Key Remove BSI and open it, locate 8-foot CPU, be careful to find chip 95160. You are required to read the CPU 95160 chip data. Solder...

Pogledaj dalje »